A brief discussion on the reasons for the imbalance of compression ratio of Pattern Braided Sleeve

The Pattern Braided Sleeve can generally be divided into double-headed tubes, knitting tubes, and shower tubes according to the above functions. The production process of Pattern Braided Sleeve manufacturers can be divided into three grades: low, medium, and high. The inferior Pattern Braided Sleeve materials use relatively low-end fine-pitch aluminum wire, iron nuts, zinc alloy shells, and plastic connecting tubes.

1. The size adjustment of the mold on the machine is wrong, which will cause the ratio of the normal compression ratio to be disordered during the knitting process, resulting in disconnection. The solution is to ensure the size of the mold on the machine.

2. The oil or water is cut off during the mold on the machine, causing the mold to run the hole distance in a short period of time, and the compression ratio is unbalanced, resulting in wire breakage. The solution is to add lubricant to each mold in time to ensure its cooling and lubrication.

3. When wicker wire occurs during the knitting process, the speed of the retraction angle is too fast, which will cause the stainless steel mesh to break. The solution is to replace the mold to ensure that the wicker wire situation will not occur again.

4. The mold consumes too fast in one direction, resulting in an imbalance in the compression ratio of the front and back in the Pattern Braided Sleeve, resulting in broken wires, which is manifested as several broken wires in one part. The solution is to replace the mold and adjust the compression ratio of the front and back until everything is normal.

The high-density braided mesh tube is woven with materials such as PET, and has good friction resistance, elasticity, smoothness, flame retardancy, air permeability and thermal conductivity. The product is widely used in computer power cables, speaker surveillance video cables, lighting fixtures, refrigerators, washing machines and other electrical appliances, as well as the maintenance and decoration of optical cables, motorcycles, vehicles, airports and other routes. It can be woven with brushed or three-wire colorful Pattern Braided Sleeve of different widths, different colors and different Pattern Braided Sleeve according to user requirements.