A brief introduction to the production and use of Silicone Glass Fiber Tube

Silicone Glass Fiber Tube is the abbreviation of stainless steel metal braided mesh tube. It is composed of mesh sleeve, sheath, cannula, Silicone Glass Fiber Tube, screw cap and other parts. Stainless steel metal braided mesh can be divided into 201 material, 304 material and 316 material according to the material. Usually the most commonly used is generally 304 stainless steel metal braided mesh pipe. Of course, most of them refer to that the Silicone Glass Fiber Tube is made of 304 material. Some also include intubation tubes and nuts made of 304 material. The mesh sleeve and sheath cannot touch the medium circulating in the pipeline, so many of them are replaced by 201 material. Because of price competition, even some intubation tubes, sheaths, and nuts use 201. And the nuts are made of iron. Silicone fiberglass tubing is rarely useful for 201.

According to the shape of the Silicone Glass Fiber Tube, it can be divided into: helical wave and ring wave. Helical wave saves material, and the tube is light in weight, but the tube is hard and not easy to bend. The ring wave has good flexibility and is deeply loved by users. But because the weight is nearly half, so the price will be relatively high.
Silicone Glass Fiber Tubes are very long before they are made, and one piece of tens of meters or even hundreds of meters is placed there. Cut to the length required by the customer. The length of the pipe is controlled at this time. Some unscrupulous manufacturers lower their prices in order to gain profits. Will stretch the silicone fiberglass tubing.
Because selling to customers is calculated according to the length. Such a one-meter Silicone Glass Fiber Tube can be sold at a price of one meter to one meter two. Others use small-sized Silicone Glass Fiber Tubes and pull fine mesh sleeves. In this way, compared with others, the same specification is about three to five millimeters smaller.
Of course, some people think that the smaller the inner diameter of the pipe, the greater the pressure. Due to the diameter of the two-end connector, a large inner diameter of the pipe may not be useful. However, the practice of narrowing the pipeline is still to be condemned.
After the Silicone Glass Fiber Tube is cut off, it is cut off with a net cover. Put sheaths on both ends to prevent the net from spreading. Weld the silica gel fiberglass tube and the net sheath first. Then put the required nut on the cannula and perform secondary welding. From the welding port, we can see the skill of the welding master.
After welding, polish the welding place. If you have not polished it, you will see that the color of the weld is different. At this time, the temperature is high and cannot touch the water, otherwise it is easy to rust. The length and curvature of the braided mesh tube are more than 45°. Cause the welded joint of the braided mesh to be stressed. Eventually, the braided mesh pipe will leak. Therefore, when choosing a Silicone Glass Fiber Tube, be sure to add three to five centimeters to the actual length. Braided mesh tubing with a little bit of curvature will last longer.
When connecting the Silicone Glass Fiber Tube to the transition joint, the threads must be screwed in parallel. It is best not to disassemble frequently after tightening. In the case of equipment vibration, the length of the Silicone Glass Fiber Tube should be extended. Do not allow objects to rest on top of the braided mesh tube. Do not expose the surface of the braided mesh to hot water or chemicals. Silicone fiberglass pipes will rust when exposed to cold water at high temperatures. Reduce the service life of braided mesh pipe.