Causes of Imbalance in Compression Ratio of 100% PET Self Wrap Braided Sleeve

100% PET Self Wrap Braided Sleeve has strong ductility, good elasticity, and good wear resistance. It can be used normally between -40°C and 150°C. The flame retardant property 94-V0 is high flame retardant and fireproof Safety, anti-radiation; under normal circumstances, 100% Pet Self Wrap Braided Sleeve are produced with UV fluorescent weaving, and the highly flame-retardant braided 100% PET Self wrap braided sleeve can be customized according to user standards. system.

In the case of shielding of high-speed machines,100% PET Self Wrap Braided Sleeve can be used for OEM processing. Under general criminal cases, the supporting force of the cables is very small, but it only needs to be tinned, copper, Pangang wire, aluminum 100% Pet Self Wrap Braided Sleeve has obvious characteristics if it is used in products such as magnesium.
1. The size adjustment of the mold on the machine is wrong, which will cause the proportion of the normal engine compression ratio to be disordered during the whole process of weaving, resulting in disconnection. The solution is to ensure the machine operation specifications of the mold.
2. The oil or water cut off during the whole operation of the mold on the machine will cause the hole distance of the mold to run out in a short period of time, and the reduction ratio will be out of balance, and then the wire will be broken. The solution is to immediately lubricate each die to ensure it cools down and lubricates.
3. When willow wires are produced during the weaving process, the stainless steel wire mesh will be broken if the angle is too fast. The solution is to replace the mold to ensure that the condition of the willow filaments does not recur.
4. The consumption of a certain path in the mold is too fast, resulting in an unbalanced shrinkage ratio in the front, rear, left, and right of the 100% PET Self Wrap Braided Sleeve, and broken wires occur, which specifically manifests as several broken wires in one part. The solution is to replace the mould, and adjust the ratio before and after adjustment until it is normal.
100% PET Self Wrap Braided Sleeve has strong ductility, good elasticity, and good wear resistance. It can be used normally between -40°C and 150°C. The flame retardant property 94-V0 is high flame retardant and fireproof Safety, anti-radiation; under normal circumstances, when using UV fluorescent weaving, the 100% PET Self Wrap Braided Sleeve of the highly flame-resistant braided pull type can also be customized according to the user's specifications.
In the case of shielding of high-speed machines, 100% PET Self Wrap Braided Sleeve can be used for OEM processing. Under general criminal cases, the supporting force of the cables is very small, but it only needs to be tinned, copper, Pangang wire, aluminum If it is used in products such as magnesium, its characteristics are obvious. The company's colorful 100% PET Self Wrap Braided Sleeve is used to shield the net weaving and aluminum winding.
Its material is pure, because it is made of PET, it has good effect in the protection and binding of computer cables, it is easy to bend and loosen and tighten, and its good elasticity has a good performance on it. , Flame retardant grade UL94V-2, firmly believe that the actual operation of soft bending wires is the beginning of product quality certification.