Causes of imbalanced compression ratio of Cable Sleeve

The Cable Sleeve has strong ductility, good elasticity, and very good wear resistance. It can be used normally between -40 degrees and 150 degrees. The flame retardant properties are 94-V0, high flame retardant, fire safe, and amplitude resistant. Under normal circumstances, when Braided Sleeve manufacturers use UV fluorescent braiding, highly flame-retardant braided Braided Sleeve can be customized according to user requirements.

When the high-speed machine is shielded, the Cable Sleeve can be used for OEM processing. Under normal circumstances, the support force of the cable is very small, but it only needs to be plated with tin, copper, Pangang wire, aluminum, magnesium and other products. If used continuously, the properties of Cable Sleeve are obvious.
1. An error in the size adjustment of the mold on the machine will cause the normal engine compression ratio to be disordered during the weaving process, leading to disconnection. The solution is to ensure that the mold's operating specifications are met.
2. The oil or water is cut off during the entire mold loading process, causing the mold to run out of hole spacing in a short period of time, causing an imbalance in the shrinkage ratio, and thus wire breakage. The solution is to immediately add lubricant to each mold to ensure its cooling and lubrication.
3. When the willow wire is generated during the weaving process, the stainless steel wire mesh will break if the retraction speed is too fast. The solution is to replace the mold to ensure that the switch wire situation will not happen again.
4. A certain path in the mold is consumed too quickly, causing the front, rear, left, and right shrinkage ratio of the Braided Sleeve to be unbalanced, resulting in wire breakage, which is specifically manifested as several wire breakages in one location. The solution is to replace the mold and adjust the front and rear to reduce the proportion until it is normal.
The Cable Sleeve has strong ductility, good elasticity, and very good wear resistance. It can be used normally between -40 degrees and 150 degrees. The flame retardant properties are 94-V0, high flame retardant, fire safe, and amplitude resistant. Under normal circumstances, when using UV fluorescent braiding, highly flame-retardant braided Braided Sleeve can also be customized according to user specifications.
When the high-speed machine is shielded, the Cable Sleeve can be used for OEM processing. Under normal circumstances, the support force of the cable is very small, but it only needs to be plated with tin, copper, Pangang wire, aluminum, magnesium and other products. If it is used in China, its performance is obvious. When the shielding mesh is braided and aluminum is hidden, it is the company's colorful Braided Sleeve.
Its material is excellent. Because it is made of PET, it has an effective effect in the maintenance and tightening of computer cables. It is easy to bend and loosen or tighten. Its good elasticity has a very good effect on it. , flame retardant grade UL94V-2, I believe that the soft bending wire operation is certified product quality