Causes of permanent deformation of Kevlar Braided Sleeve molds

Everyone knows that the Kevlar Braided Sleeve mold has a high probability of deformation. Once deformed, its use value will be greatly reduced. There are reasons for the Kevlar Braided Sleeve mold to deform, and it is directly related to the maintenance during use. So what are the reasons that cause the Kevlar Braided Sleeve mold to be permanently deformed.

There are three main reasons for the deformation of the Special Material Braided Sleeve of the mold, including aging maintenance, silicone oil content and irregular maintenance. Let`s talk about these points:
1. Aging maintenance
That is to say, the Special Material Braided Sleeve will age without regular maintenance of the mold. Such Special Material Braided Sleeve will be easily deformed. If the Special Material Braided Sleeve are not completely aged and maintained, not only will they be deformed, but their service life and quality will also be affected. There was a significant decline.
2. Silicone oil content
The content of silicone oil actually directly determines the quality of Special Material Braided Sleeve. If too much silicone oil is added during the processing stage, it will cause the viscosity of the silicone oil to be too high. If too little silicone oil is added, it will cause special knitting. Sleeve quality is not good. Therefore, the content of silicone oil will directly determine whether the Special Material Braided Sleeve is easy to deform, which is due to quality reasons.
3. Irregular maintenance of Special Material Braided Sleeve
Special Material Braided Sleeve require maintenance to prevent deformation, but irregular maintenance can also lead to deformation. What is going on? During the maintenance process, especially during the aging maintenance stage, if the mold of the Special Material Braided Sleeve has not been fixed correctly, the mold will It needs to be bound and fixed with the outer mold or the inner mold, so as to completely prevent deformation during the aging and maintenance stage.