Correct use of Automotive Wiring Harness Protection Sleeve can extend product life

Cable Sleeve manufacturers said that Cable Sleeve damage is generally divided into two situations: one is that the material has high hardness and the friction of the Automotive Wiring Harness Protection Sleeve causes the Cable Sleeve to be damaged; the other is that the friction between the net and the Automotive Wiring Harness Protection Sleeve causes the Cable Sleeve to be damaged. The sleeve creates numerous small holes, which then lead to damage to the Cable Sleeve from the edges and center.

1. As we all know, the target of Cable Sleeve is determined by the hole diameter and wire diameter. At this time, we need to make sure to increase the wire diameter without changing the hole diameter, and then use a high-hardness Cable Sleeve material so that the Cable Sleeve will not wear the screen holes in a short period of time.
2. It will appear in the high-precision viscous slurry filtration process. In the process of screening ceramic slurry, Cable Sleeve are often damaged from the edges and the middle, because the number of Cable Sleeve used to filter ceramic slurry is high and the price is also very expensive, so saving Cable Sleeve means saving production costs.
We add leather pads on the edge of the screen frame to make the edge of the Automotive Wiring Harness Protection Sleeve soft friction. Generally, the center force of the Cable Sleeve, that is, the friction between the center Cable Sleeve and the lining mesh is serious, and the screening effect is poor, so we put the center of the Cable Sleeve 5cm Separate them with rubber pads to reduce the hard friction between the Cable Sleeve and the lining mesh and the edge of the Cable Sleeve. Tests have proven that it can increase the service life of the original Cable Sleeve.