Frequently asked questions about the use of 100% PET Self Wrap Braided Sleeve

The stress-bearing capacity of 100% PET Self Wrap Braided Sleeve mainly lies in the inner layer and the middle braided layer. If the installation is not reasonable during use, it will cause airflow to penetrate into the inner layer between the inner layer and the outer layer. At this time, the hose is critical Relying on the outer layer to bear the force will cause the stress-bearing capacity of the 100% Pet Self Wrap Braided Sleeve to be greatly reduced, causing the tube body to collapse.

If the 100% PET Self wrap braided sleeve uses a coat-type quick connector, or uses a threaded joint/hose clamp with burrs or burrs, it will most likely cause the 100% PET Self Wrap Braided Sleeve to delaminate and crack.
We can see that when using a coat-type quick connector to insert a 100% Pet Self Wrap Braided Sleeve, the sealing performance of the outer layer mainly depends on it. In this case, gas can easily escape from the inner layer, causing the outer layer to burst and the pipe body to delaminate.
Minimize 100% PET Self Wrap Braided Sleeve and use coat-type quick connectors that rely on the outer layer to seal.
If you find that the outer layer of the 100% PET Self Wrap Braided Sleeve is cracked or the pipe is laminated during use, please check whether a coat-type quick connector is used and whether there are burrs on the connector and hose clamp.
If you want to use a coat-type quick connector, it is recommended to use a single-sided Pisces head PU pipe if the working pressure permits.
1. When inserting the threaded joint, please do not apply grease or heat the threaded joint of the hose with fire. Please use a small amount of warm boiled water to warm the hose before installation.
2. Please use a connector with suitable hose specifications, cut the wound neatly and insert the hose as much as possible. Be careful not to use connectors with burrs, scars, or rust.
3. Please use hose hoops of appropriate size and do not use shoddy hose hoops with burrs.
4. Avoid using steel wire instead of hose hoops and avoid excessive tightening of hoses.
5. Do not use coat-type quick connectors for 100% PET Self Wrap Braided Sleeve, otherwise it will easily cause the hose to delaminate and break.