he Polyester/cotton Braided Sleeve have errors as expected, so what are the reasons for these errors?

TAs the Polyester/Cotton Braided Sleeve technology becomes more and more perfect, the quality of the Polyester/cotton Braided Sleeve produced is getting better and better. In daily production, sometimes we encounter some problems, such as the Polyester/Cotton Braided Sleeve produced. There are errors in the Braided Sleeve as expected, so what are the reasons for these errors?

1. It is very important to increase the temperature of the mold during molding. It is important to know that the higher the temperature of the molding mold, then the raw Special Material Braided Sleeve will be able to be molded according to the molding mold well due to the temperature. The fluidity of the raw material is also close to the movement of the grinding tool, and the fluidity of the raw material is relatively poor. The size of the molded product will not be different from the expected one!
2. We will give a force to the raw Special Material Braided Sleeve during molding. Through a moderate force, we can compress the raw Special Material Braided Sleeve to a fixed size, so the molding pressure must be reasonably controlled. For example, if the pressure is too high, the thickness will become thinner and the size will become larger, but not vice versa.
3. Sometimes it may be a problem with the design of the mold itself. The design is not rigorous and qualified. Then no matter how the size is adjusted during production, there will be some errors, because the rigor of the mold must be paid attention to when opening the mold. There must be no deviation from the scale of the product. Generally speaking, problems with the mold itself are relatively rare in the Polyester/cotton Braided Sleeve production industry, but we cannot rule out this reason.