How does braided network tube protect wires and cables from damage?

Open Type Braided Sleeve is a common wire and cable protection material, which can effectively protect wires and cables from damage.

The first is to choose the material. Open Type Braided Sleeve are generally made of polyester, nylon, polyurethane and other materials. Different materials have different properties and uses. The polyester Open Type Braided Sleeve has high temperature resistance and wear resistance and is suitable for protecting wires and cables in high temperature environments; the 100% PET Self Wrap Braided Sleeve has good corrosion resistance and is suitable for protecting wires and cables in harsh environments;Polyurethane Open Type Braided Sleeve have good flexibility and wear resistance, and are suitable for protecting wires and cables in mobile equipment or frequently vulnerable parts. When selecting materials, the selection should be based on the specific use environment and requirements.
The second is the installation method. There are many ways to install Open Type Braided Sleeve, the most common ones are free stretch and self-locking. Free-stretch installation is simple, just put the casing on the wires and cables; self-locking installation requires connecting the two ends of the casing together and fixing the wires and cables through a self-locking structure. Regardless of the installation method, attention should be paid to the length and diameter of the casing to match the wires and cables, and not to be too tight or too loose to avoid affecting the protective effect of the casing.
Again, there are precautions for use. The following points need to be noted when using Open Type Braided Sleeve. First of all, the wear of the casing should be checked regularly. Once obvious wear or damage is found, it should be replaced in time to prevent the casing from being unable to effectively protect the wires and cables. Secondly, the casing needs to be cleaned regularly to maintain its cleanliness and good protective effect. When cleaning, you can gently scrub with warm water or neutral detergent. Be careful not to use overheated water or strong acid and alkali solutions to avoid damaging the material of the casing. In addition, avoid exposing the casing to sunlight for a long time during use to prevent ultraviolet rays from the sun from damaging the casing material.
In addition to the above protection methods, you can also consider adding a layer of 100% Pet Self Wrap Braided Sleeve or sheath to the Open Type Braided Sleeve to improve the insulation and protection capabilities of wires and cables. 100% PET Self wrap braided sleeve can be made of PVC, polyurethane and other materials, and sheath can be made of PVC, nylon and other materials. This can not only increase the resistance of the wires and cables to the external environment, but also extend the service life of the wires and cables.
To sum up, Open Type Braided Sleeve, as a common wire and cable protection material, can effectively protect wires and cables from damage. When selecting materials, the selection should be based on the specific use environment and requirements. During installation and use, attention should be paid to appropriate installation methods and correct usage methods. At the same time, the casing should be regularly inspected and cleaned to maintain its good protective effect.