How to deal with the dust on the surface of the Neoprene Zipper Cable Sleeve?

We know that Neoprene Zipper Cable Sleeve is not only used in many other industries in our life, but after a long period of use, we will find a lot of dust. We also have it for dust cleaning. My own way, let's talk about how to deal with the dust on the surface of the Neoprene Zipper Cable Sleeve?

1. Place in water: place in water, if you find that there is dust on the surface of the Neoprene Zipper Cable Sleeve, you can directly cool it and place it in clean water. You can add a small amount of bleach to the water or soak it in the water for dozens of minutes. Wipe directly, the advantage of this method is that it is simple and easy to operate, and there is no cost. However, there are requirements for the time of placing in the water, and it cannot be placed under the condition that the silica gel will have residual heat, otherwise it will easily lead to the occurrence of product tolerance narrowing to the lower limit. After placing in the water, it needs to be mechanically or naturally air-dried. Will affect the speed of product shipment
2. Alcohol wiping: Alcohol wiping is one of the most widely used soil methods at present. The advantage is that it is economical and easy to operate. It should be noted that the surface of the Neoprene Zipper Cable Sleeve will be much cleaner after alcohol wiping, but at the same time it will Stimulate the adsorption value of silica gel, causing sticky dust and impurities to speed up again, so it is recommended to quickly pack the Neoprene Zipper Cable Sleeve into a clean and sealed environment after wiping the Neoprene Zipper Cable Sleeve with alcohol, such as PE bags, cartons, etc., do not Exposure to a dusty environment again, and alcohol is one of the hazardous chemicals, requires professional training before using alcohol to wipe the dust on the surface of the Neoprene Zipper Cable Sleeve.
3. Whitening oil: Whitening oil is frequently used in calendering, molding, and liquid-solid injection processes. The advantage is that whitening oil has a very strong cleaning ability, especially for silicone products. A little drop of whitening oil is used in absorbent cotton cloth The wiping effect is very good, but it should be noted that the white electric oil has certain corrosive properties, but it will be dried quickly, so when using white electric oil to wipe the dust on the surface of the Neoprene Zipper Cable Sleeve, the operator needs to wear gloves. And do not wipe the Neoprene Zipper Cable Sleeve with white electric oil for a long time, because it will corrode its surface and increase the positive and negative tolerance of the product size. It is recommended to wipe it within 3 minutes after white electric oil is dropped on the surface of the Neoprene Zipper Cable Sleeve Let it air dry. In conclusion, white electric oil is good but the amount should be controlled.