How to ensure the fineness of the Silicone Glass Fiber Tube?

Silicone Glass Fiber Tube are all made of molds. The role of molds is involved in many industries and products, so its importance can be imagined. It is natural to choose a durable material for the processing of molds, so a Product changes and production have a certain relationship with the mold. For example, silicone, plastic and other rubber and plastic materials need to be molded. The mold for the silicone fiberglass tube industry is unique. Its mold surface can make Silicone Glass Fiber Tube. change?

First of all, the thickness of the mold determines the surface fineness of the product, so the thickness may also affect the mold surface effect of the product. In many cases, the Insulation Tubes will spray different sandstones on different Silicone Glass Fiber Tube to maintain the mold of the product. Therefore, some mold surface effects are usually matte or frosted. This effect is a more commonly used effect, but the thickness of the matte surface is determined by the thickness of the sand.
Silicone Glass Fiber Tube is not good. What will happen to the mold after demoulding? The surface of the mold is coated with a layer of Teflon, which has the effect of anti-sticking. production efficiency, but the disadvantage is that after the product is sprayed with Teflon, the surface will be partially glossy, which will cause local reflections after the silicone rubber product is made, especially for products with a relatively small surface area. It's hard for this to happen.
Advantages and disadvantages of mirror effect: mirror effect is the smoothest surface treatment in the mold. It can not only make your product reflective, but also achieve high transparency. Therefore, many silicone molds will be electroplated on the surface. The effect, the advantage depends on its bright surface, the aesthetics is getting worse and worse, and it looks more and more high-grade and brand sense, so the defect is that the lower the gloss, the harder it is for the silicone product to cause dust, and the lower the viscosity of the surface The smaller it is, so the surface treatment of the product also needs to carefully consider the surface effect of the product in combination with reality and other factors.