How to make use of discarded Automotive Wiring Harness Protection Sleeve?

Automotive Wiring Harness Protection Sleeve are tubes made of Cable Sleeve materials with different thicknesses. They are mainly used in hospitals, equipment factories, power plants, scientific research laboratories and other fields. Generally, during production, there will be defective products, products with incorrect specifications, or products that have been aged for a long time and discarded. If these discarded products are not disposed of properly, it will cause environmental pollution. Here we briefly introduce how to use discarded Automotive Wiring Harness Protection Sleeve.

1. The car harness protective cover is made from the Cable Sleeve material of the rubber tree, and the basic chemical composition is cis-polyisoprene. Is a high molecular weight, highly elastic compound.
How is the discarded car wiring harness protective cover dissolved, is it through a chemical reaction or a physical reaction?
Second, the chemical reaction is to degrade first, then polycondense and finally finalize the shape. The principle of this method seems to be feasible, but it is actually quite difficult. Professional equipment is required; the physical reaction is to dissolve directly with a solvent. Generally, good solvents include alcohol and gasoline. The solubility of gasoline is higher than that of alcohol. Here, gasoline is used as the solvent.
The specific method is as follows:
1) Use scissors to cut up the discarded car wiring harness protective cover;
2) Boil in boiling water for a while and stir;
3) Pour into the solvent of gasoline to dissolve;
4) After dissolving, pour it into the mold prepared in advance;
5) Wait for the molding to dry.
A good cable sleeving mask will do the trick.
In short, the editor thinks that the physical method is much simpler than the chemical method, and at the same time, other small objects can also be made from discarded Automotive Wiring Harness Protection Sleeve.