How to prevent PP Zipper Braided Sleeve from aging and insufficient lifespan!

Most rubber and plastic materials will basically have aging deformation. With the precipitation of time and the influence of the use environment, the aging problem of PP Zipper Braided Sleeve is also relatively common. Most of the Cable Sleeve and accessories are for appearance decoration, and they have been used for too long. Later, with the influence of the environment and the influence of long-term twists and turns and wearing, it will cause stickiness, softness, and appearance deformation, obvious hardening, etc., and the service life will be reduced. Soon after use, cracking and damage will appear. Is this problem? It is an aging phenomenon.

Under normal circumstances, the aging phenomenon of Cable Sleeve products rarely occurs. Usually, the aging phenomenon of PP Zipper Braided Sleeve materials is mainly determined by the function of the product and the way it is used, such as Cable Sleeve oil seals and Cable Sleeve. Buffer shock absorbers and so on belong to normal use aging, which cannot be avoided, because long-term force will naturally form the phenomenon of aging cycle, but the phenomenon of Cable Sleeve wristband strap is a bit unreasonable, and there are other factors in it. Something is wrong.
First of all, if the PP Zipper Braided Sleeve is in normal use, the impact of the environment is one aspect. The Cable Sleeve products are usually subject to oxidation, heat, light, strength, and liquids, which will have a certain impact on the aging life. After research, the surface The impact of these aspects on the aging of PP Zipper Braided Sleeve products is as follows:
1. Oxidation: In the ozone, the Cable Sleeve product changes with time, resulting in greater damage to the material. The molecular chain compound of the Cable Sleeve is different, resulting in a change or reduction in the performance of the PP Zipper Braided Sleeve product, and low efficiency changes will occur The material performance of the PP Zipper Braided Sleeve, you will find that your Cable Sleeve strap may slowly deform and rebound slowly every day!
2. Light and heat: The impact of light and heat is mainly due to the appearance. Long-term exposure to ultraviolet rays and light sources may cause silicon atoms to expand and appear to expand, and the surface will change color. However, there is no change in short-term exposure to light and heat.
3. Strength: The more serious impact of force is that the product is stretched and extruded for a long time. Over time, the silicon molecular chain in the material is damaged and cannot be restored. After long-term stretching, there is no resilience, the tensile force drops or even breaks.
4. Liquid oil: The Cable Sleeve is a highly absorbent material that is insoluble in water and any liquid, but long-term contact with water will cause water molecules to penetrate into the Cable Sleeve and destroy the basic properties of the material, resulting in product performance degradation and even discoloration.