How to put double-sided tape on the Automotive Wiring Harness Protection Sleeve?

Automotive Wiring Harness Protection Sleeve are mainly used in various industries for sealing, shock absorption, anti-skid, etc., but they need to be glued to other components, such as metal, plastic, wood, etc., so that the surface can achieve the desired effect, but how to firmly stick the Automotive Wiring Harness Protection Sleeve to its surface? Some customers use double-sided tape as the medium to bond the protective sleeve of the automotive wiring harness, but the Cable Sleeve itself cannot be bonded by the double-sided tape, so what should I do? Today, the technical editor will introduce how to put double-sided tape on the Automotive Wiring Harness Protection Sleeve.

First, wipe off the dirt on the side of the Automotive Wiring Harness Protection Sleeve that needs to be bonded with toluene, otherwise impurities or dust will cause insufficient bonding between the bonding surface of the Automotive Wiring Harness Protection Sleeve and the double-sided tape. After cleaning and drying, brush or spray evenly the adhesive surface of the Cable Sleeve with a treatment agent, and place it on the workbench to dry at room temperature for 5-10 minutes, and then paste it on the double-sided adhesive tape with the same cut size as the adhesive surface of the Cable Sleeve. When the Automotive Wiring Harness Protection Sleeve is completely attached to the double-sided adhesive, let it dry at room temperature for 4-6 hours, and it will basically stabilize after 24 hours.
However, due to the difference of the material to be bonded and the double-sided adhesive tape, the bonding effect will be different. Therefore, in order to avoid changes in the material to be bonded and the adhesive tape, an adhesion test is required before use.