How to use Silicone Glass Fiber Tube correctly?

Silicone Glass Fiber Tube is a high-end heat-conducting compound, and its non-solidification and non-conductive characteristics can avoid risks such as short circuits; its high bonding performance and super thermal conductivity are currently the best when CPUs, GPUs and radiators are in contact. The best thermal solution. Silicone Glass Fiber Tube can be widely coated in various electronic products, the contact between heating elements (power tubes, silicon controlled rectifiers, electric heating stacks, etc.) The surface acts as a heat transfer medium and has properties such as moisture-proof, dust-proof, corrosion-proof, and shock-proof. The main purpose of selecting the Silicone Glass Fiber Tube is to reduce the contact thermal resistance between the surface of the heat source and the contact surface of the heat dissipation device.

Silicone Glass Fiber Tube can fill the gap of the contact surface very well, squeeze the air out of the contact surface, air is a poor conductor of heat, which will seriously hinder the transfer of heat between the contact surfaces; with the supplement of Silicone Glass Fiber Tube, it can Make the contact surface better and fully contact, and truly achieve face-to-face contact. The reaction on temperature can achieve the smallest possible temperature difference.
The heat conduction effect of Silicone Glass Fiber Tube is relative. Although its heat conduction performance is better in flexible materials, it is generally in the range of 0.6-1.5W/, and a few performances may be higher, but none exceed 2W/. It is higher than water 0.5, vulcanized rubber 0.22, vaseline 0.184[1] and so on. But there is no advantage with cement's 1.5W/. The thermal conductivity of almost all metals is much higher than that of Silicone Glass Fiber Tube. The thermal conductivity of gold, silver and copper in metals is between 330 and 360, and the thermal conductivity of aluminum is about 200. Silicone Glass Fiber Tube itself is not a good conductor of heat, the function of the Silicone Glass Fiber Tube is to fill the gap between the heat source and the radiator. Therefore, the thinner the Silicone Glass Fiber Tube is, the better. It can be applied with a 0.1-0.5 mm thick Silicone Glass Fiber Tube to fill the gap, and the effect is much better than a 1 mm thick silicone sheet.