Inspection of reverse direction characteristics of Neoprene Velcro Cable Sleeve

With the rapid development of economy and society, the objects we use are also constantly changing. For example, Neoprene Velcro Cable Sleeve are an effective example. With the development trend of Neoprene Velcro Cable Sleeve, We are becoming more and more familiar with Neoprene Velcro Cable Sleeve. The Open Type Braided Sleeve manufacturer would like to tell you about the reverse detection of Neoprene Velcro Cable Sleeve.

To detect the positive direction characteristics, touch the black test lead of the digital multimeter to the positive terminal of the Neoprene Velcro Cable Sleeve, and touch the red test lead to the negative terminal of the Neoprene Velcro Cable Sleeve. If the pointer is not placed at 0 but stops in the middle of the dial, the resistance value at this time is the forward resistance of the Neoprene Velcro Cable Sleeve. Generally, the lower the forward resistance, the better. If the forward resistance is 0, it indicates that the tube core is short-circuited and damaged. If the forward resistance is close to a high value, it indicates that the tube core is short-circuited. Short-circuited and open-circuited pipes cannot be used.
Electronic switch, Neoprene Velcro Cable Sleeve has little resistance under forward voltage, and is in the off state, which is equivalent to a connected power switch; under reverse voltage, the resistance is very large, and is in the off state. Ending up like a broken switch, using the switching properties of Neoprene Velcro Cable Sleeve, a variety of sequential logic circuits can be formed. Detection Neoprene Velcro Cable Sleeve, used for detection in recorders. Variable volume Neoprene Velcro Cable Sleeve for use in TV tuners.
Limiting component, after the forward direction of the Neoprene Velcro Cable Sleeve is passed through, the loss in the forward direction remains basically unchanged. The silicon tube is 0.7V and the germanium tube is 0.3V. Using this characteristic, it is used as a limiting component in the power circuit. The signal strength can be limited to a certain area, and the Velcro cable bushing can be used to relay the current in the inductor of the power supply circuit and the relay.