Introducing the testing content of PEEK Braided Sleeve

Peek Braided Sleeve is one of the basic components of semiconductors. It has the function of current amplification and is the main component of electronic circuits. There are many types of crystalline PEEK Braided Sleeve in China, with different pin arrangements. When using PEEK Braided Sleeve with uncertain pin arrangements, measurements must be made to determine the correct position of each pin, or Search the transistor operating manual to establish the characteristics of the PEEK Braided Sleeve and the corresponding performance parameters and materials. PEEK Braided Sleeve is woven from tough environmentally friendly PET wire drawing and has strong elasticity, wear resistance, flame retardancy and elastic properties.

For the reverse characteristic test, touch the red test lead of the multimeter to the positive level of the PEEK Braided Sleeve, and touch the black test lead to the negative level of the PEEK Braided Sleeve. If the meter rod points at or close to infinity, the pipe is meet the standard. For positive direction characteristic testing, touch the black test lead of the multimeter (positive level in the meter) to the positive level of the PEEK Braided Sleeve, and touch the red test lead (negative level in the meter) to the negative level of the PEEK Braided Sleeve.
If the pointer is not placed at 0 but just stops in the middle of the dial, the resistance at this time is the positive resistance of the PEEK Braided Sleeve. Generally, the lower the positive resistance, the better. If the forward resistance is 0, it means the core tube is short-circuited and damaged. If the forward resistance is close to infinite, it means the core tube is short-circuited. Short-circuited and broken pipes cannot be used.
Electronic switch, PEEK Braided Sleeve has little resistance under the action of forward working voltage, and is in the on-off state, which is equivalent to an connected power switch; under the action of reverse direction current, the resistance is very large, and is in the off state. , like a broken power switch. Using the switching characteristics of PEEK Braided Sleeve, various sequential logic circuits can be formed. Detection PEEK Braided Sleeve plays the detection function in the recorder.
Variable capacity PEEK Braided Sleeve is used in the tuner of TV. Limiting component, after the forward direction of the PEEK Braided Sleeve is passed through, the pressure drop in the forward direction will basically remain unchanged (the silicon tube is 0.7V and the germanium tube is 0.3V. This feature is used as a limiting component in the power circuit. The signal strength can be limited to a certain area. The relay PEEK Braided Sleeve plays a relay role in the inductor of the power supply circuit and the relay and other AC currents.