Introduction to the method of delaying the expiration date of Nylon Braided Sleeve

Like all weaving techniques, the contemporary nylon wear-resistant weaving mesh technique is the inheritance of a long-standing weaving technique and the expansion of culture, and the emergence of a culture and art requires that the weaving technique also has a long history and elegant demeanor. Weaving technology has been upgraded and changed in every dynasty and generation. During the Southern and Northern Dynasties, weaving technology has already advanced to a professional link. Various small weaving craft workshops have emerged one after another, and everyone's choices are becoming more and more colorful. Willow Various bamboo and rattan weaving handicrafts appeared alternately, and there were various kinds on the shelves of the market. In the Tang Dynasty, people's feelings for weaving products also changed fundamentally, from the simple use of the gods to a kind of Emotional sustenance.

The use of nylon weaving is the same as that of ordinary weaving network pipes, and it can be expanded to 200%. If your equipment is 3MM in diameter, then you can use nylon weaving network pipes with a flat width to support, which is suitable, saving raw materials and beautiful appearance Dafang, if you don't want to break the mouth, just burn it with a lighter.
Under normal circumstances, there are two reasons for the short application period, one is the hardness of the organic matter, and the other is the damage caused by soft friction at different levels during the high-precision viscous slurry filtration operation. For these two In such a situation, how to maintain it so that it can be used for a longer time, let`s take a look at the methods recommended by this website for you:
1. The operation method with too high hardness, because the hardness is relatively high, the friction will undoubtedly be too large, which will cause damage. In addition, when the mending mesh rubs against the Nylon Braided Sleeve mesh pipe, it will cause many small holes , At this time, the method we use is to increase the wire pitch of the Nylon Braided Sleeve mesh pipe, and then choose products with high hardness, so that it can be used for a longer period of time.
Second, we can lift the apron at the edge during the screening process to reduce the friction of the Nylon Braided Sleeve mesh pipe. Generally speaking, the bearing point is at the center. Therefore, use a 5cm rubber pad to separate the center. In this way, the forced friction between the Nylon Braided Sleeve mesh pipe and the lining mesh will be reduced, and as long as the friction at the center is reduced, the service life of the mesh pipe can be increased by more than 3-5 times.