PP Zipper Braided Sleeve should be woven from PP raw materials

For the types of products currently on the market, they can be regarded as rich and colorful, and the key is to combine the differences in materials and their functions to carry out divisions. Specifically, according to the difference in raw materials, the telescopic PP Zipper Braided Sleeve should be woven with PP raw materials, which have good wear resistance, expandability, smoothness, flame retardancy, breathability and thermal conductivity. Products are widely used in computer power lines, audio and video lines, lighting, central air-conditioning.

refrigerators, fully automatic washing machines and other electrical products, as well as optical cables, motorcycles, vehicles, airports and other lines for daily maintenance and decoration functions, according to customer requirements Weave PP Zipper Braided Sleeve with different widths, colors, and patterns with brushed or three-filament. As far as the product features are concerned, it is mainly manifested in the following aspects: This product has relatively obvious conductivity, so it is unique in its single-specificity, that is, it can only rely on the positive electrode to inject and the negative electrode to discharge. Secondly, in the application of this product, it is closely related to semiconductor devices from beginning to end, which is also the earliest product in semiconductor products.

1. Name of PP Zipper Braided Sleeve
F4 Cable Sleeve, Teflon Cable Sleeve.
2. PP weaving network management F46 weaving network management.
There are several kinds of PP Zipper Braided Sleeve currently produced, mainly including: braided cotton rope air-conditioning pipes, 304 stainless steel Teflon Cable Sleeves, 316 stainless steel Teflon Cable Sleeves, and anti-static metal bellows.
3. New green insulation layer, environmental protection wire and cable with PP zipper braided sleeve
①CMP cable.
②The cables that can pass the standardization of UL flame retardant level are CMP cables. The three companies Dubang, Luxun and BICC have done many combustion tests on electric wires and cables, and scientific research has found that extruding a layer of PP (ie f46) outer sheath on the outside of conventional cables can meet this requirement. .
Generally speaking, the basic material of low-smoke and halogen-free is isoprene rubber, which has a high fuel calorific value and is relatively highly flammable, so they need to be mixed with metal compound fillers to control its flammability Sex, but after the hydration water is exhausted, it can also cause violent ignition. However, PP does not boil much, and it is not flammable when it sees fire.
④ Wulu new low-carbon environmental protection wire and cable.
4. PP heat-resistant wire and cable with PP zipper braided sleeve
PP Cable Sleeve has good temperature resistance, physical properties, insulation properties, and moldability, especially with the obvious characteristics of being able to persist in use at high temperatures and maintain stable quality in environments where the ambient temperature changes suddenly: heat distortion temperature At 200-220 degrees, insist on using an ambient temperature of 180-200 degrees, and the UL ambient temperature index value is 180 degrees; it can withstand boiling water or steam at 150-160 degrees, and will not be corroded by acids and alkalis at high temperatures; the elastic mold is at -100 -200 degrees will basically not change, especially at around 100 degrees, it is better than any other thermoplastic; the thermal expansion coefficient is small, and its environmental temperature dependence is also small; it is non-toxic, self-extinguishing, and does not contain any resistance. The combustion agent not only has excellent flame retardancy, but can reach ul94v-0 level (0.46mm).