Requirements for installation of Heat Shrinkable Tube

For this kind of corrugated Heat Shrinkable Tube, it has very good elasticity, which is what we call stretchability. At the same time, it has poor rigidity and relatively strong plasticity. In view of these characteristics, there are some matters that should be paid attention to when installing this Special Material Braided Sleeve. First of all, when installing, be as careful as possible, especially for water, gas, etc. that are easy to leak. Be sure to handle it lightly to avoid deforming the pipe due to too much force, causing leakage of water, gas, etc.

Secondly, although the corrugated Heat Shrinkable Tube is very elastic, it has a certain limit, so it cannot be stretched indefinitely. If the length difference is too big, it is best to connect two pipes and fix the interface to ensure that the connection is firm and no water or air leaks. If it is stretched too much, because this Special Material Braided Sleeve is very thin, it is very likely to have holes, so it will be very unsafe to use, especially when water or air is passed through, it may leak.
Again, for safety reasons, when installing this corrugated Heat Shrinkable Tube, you must install it according to the instructions for use, and do not let it come into contact with liquids or substances that are easily corrosive. Because, although stainless steel has good corrosion resistance, since this Special Material Braided Sleeve is very thin, contact with these substances should be avoided. Otherwise, long-term contact with these corrosive substances will still cause corrosion of the Special Material Braided Sleeve.