The main methods of using Nylon Braided Sleeve

Nylon Braided Sleeve are one of the most common products nowadays. Although this product is often used by people, not many people pay attention to the application of Nylon Braided Sleeve. Therefore, I will tell you about Nylon Braided Sleeve manufacturers. Frequently asked questions about the use of Nylon Braided Sleeve, so that you can have a better understanding of Nylon Braided Sleeve.

Nylon Braided Sleeve, also known as hollow belts and wire sleeves, are made of polyester multifilament or polyester textiles and have the characteristics of oil removal, anti-fouling, anti-corrosion and noise reduction, and anti-corrosion and explosion-proof lamps. It can be widely used in industrial equipment, agricultural machinery and equipment, urban rail and other industries, and has a protective effect.
Since it is a closed-mouth sleeving type, we need to know the diameter of the product accurately before purchasing. Then the size of the Nylon Braided Sleeve must be slightly larger to facilitate stringing and threading pipes. Generally, if it is used to cover a pipe or cable If so, it is recommended to choose a Nylon Braided Sleeve size that is about 2mm larger. If it is used to thread multiple pipes or electronic wiring harnesses, you can choose a casing that is 5mm larger.
In addition, because the Nylon Braided Sleeve needs an overlocking process to close it to prevent it from coming apart, it is recommended to pull the port number sideways when inspecting the product to see if it is cracked. Of course, this problem is generally unlikely to occur, just in case.
Nylon Braided Sleeve is a kind of moisture-proof casing with simple structure, which is often used for the protection of wall pipes during construction. Nylon Braided Sleeve are relatively simple in construction. It is mainly composed of steel tubes and wing rings. Relatively long flexible waterproof casings are usually composed of 2-3 wing-shaped rings. Some people will definitely ask, can steel pipes also replace Nylon Braided Sleeve?
In some areas where regulations are more relaxed, steel pipes can be used instead of Nylon Braided Sleeve because they have an additional wing ring compared to steel pipes. In this case, what does lifting a wing ring do, it is easier to use steel pipes directly. In fact, this is not the case.
The pipe passes over the moisture-proof casing and immediately comes into contact with the moisture-proof casing. When the pipeline is operating normally, the water flowing through the pipeline will have a flow velocity, and this flow velocity will also generate mechanical energy. Therefore, normally operating pipes will not move at all, but will continue to shake. As the pipe continues to shake, the steel pipe will also suffer internal stress.
In the long run, the steel pipe is likely to shake, causing the steel pipe to lose its role in protecting the pipeline. However, if you lift the wing ring, it will be different. The wing ring is a circle that is electrically welded to the steel pipe. The main function of the wing ring is to prevent the waterproof casing from shaking, which is particularly prominent for fixed waterproof casings.
This is also the main difference between Nylon Braided Sleeve and steel pipes. Therefore, Nylon Braided Sleeve and rigid waterproof casings are essentially different. Although Nylon Braided Sleeve only have one more wing-shaped ring than steel pipes, it is precisely because of these wing-shaped rings that Nylon Braided Sleeve are more widely used and more effective.