1. Raw material preparation
The raw materials for making Pet Zipper Braided Sleeve mainly include polyurethane resin, Open Type Braided Sleeve, curing agent, filler, etc. First, these raw materials need to be prepared and proportioned in a certain proportion.
2. Treatment of Open Type
Braided Sleeve The Open Type Braided Sleeve are treated mainly to improve their adhesion with polyurethane resin. The treatment method can be soaked in a specific treatment agent to fully absorb the treatment agent, and then dried.
3. Preparation of polyurethane resin
Mix the polyurethane resin and the curing agent in a certain proportion, stir evenly, and prepare a polyurethane resin colloid. During the preparation process, certain fillers such as flame retardants, reinforcing agents, etc. can be added as needed to improve the performance of
PET Zipper Braided Sleeve.
4. Coating process
Place the treated Open Type Braided Sleeve on the workbench, and use a scraper or brush to evenly apply the prepared polyurethane resin colloid on the Open Type Braided Sleeve. Pay attention to controlling the coating thickness during coating to ensure the uniformity and certain thickness of the coating layer.
5. Curing treatment
Roll up the coated Open Type Braided Sleeve and place it in a constant temperature box for curing. The curing temperature and time are determined according to the properties of the polyurethane resin and the curing agent. Generally, the curing is carried out at a temperature of 50-80℃ for several hours to dozens of hours.
6. Trimming and inspection
After the curing is completed, the cured Open Type Braided Sleeve is taken out for trimming and inspection. Trimming mainly trims off the excess Open Type Braided Sleeve to make it neat and beautiful. Inspection mainly involves appearance inspection and performance testing of the manufactured PET Zipper Braided Sleeve to ensure that its quality meets the requirements.
7. Packaging and storage
After trimming and inspection, the manufactured PET Zipper Braided Sleeve is packaged, generally with plastic film to prevent the intrusion of dust and moisture. The packaged products should be stored in a dry and ventilated warehouse, avoiding direct sunlight and high temperature environment.