Things to note when using Open Type Braided Sleeve to make PP Velcro Braided Sleeve

When manufacturers produce PP Velcro Braided Sleeve, they usually use the forming silk screen laser engraving-glue spraying process. Let the editor tell you about this process!

This kind of Open Type Braided Sleeve is mixed with epoxy resin + curing agent, and then dripped on the surface of the Pp Velcro Braided Sleeve and allowed to dry naturally. In this way, the PP Velcro Braided Sleeve not only looks beautiful, but also protects PP Velcro Braided Sleeve. The appearance of the braided cover is not damaged.
This kind of Open Type Braided Sleeve can not only protect the appearance of the PP Velcro Braided Sleeve, but also pursue high quality and exquisiteness. If you want to achieve these advantages, you can make this kind of thing by paying attention to the following things during production. Quality product:
1. When Open Type Braided Sleeve, the utensils used in the glue dispensing process should be cleaned to avoid ripples, pitting, impurities and other undesirable phenomena after the glue is cured due to unclean utensils and impurities. ;
2. When mixing epoxy resin and curing agent, the ratio must be precise to avoid incomplete curing or too long curing time;
3. When making Open Type Braided Sleeve, a certain working environment is required. For example, the humidity of the working environment must be within 69%. If it rains, this process is not recommended because when it rains, the air humidity is lower. If it is too large, it will oxidize the surface of the glue. If you are rushing to make an order, you can use an air dehumidifier to reduce the humidity;
4. Generally, after it is made, it needs to be placed in a suitable location to let it dry naturally, so the PP Velcro Braided Sleeve should be placed together in an environment of 29%-41% for storage.