Tools and materials for cleaning Pattern Braided Sleeve

To clean Pattern Braided Sleeve, you need to prepare some tools and materials, such as buckets, detergents, soft brushes, water pipes, car wash brushes, etc. In addition, you can prepare some disinfectants or mildew inhibitors according to the situation to ensure that the Pattern Braided Sleeve can achieve better cleaning effects after cleaning.

Before you start cleaning Pattern Braided Sleeve, you must first prepare. First, conduct a comprehensive inspection of the network management to check whether there is any damage, aging or deformation. If so, repair or replace it in time. Secondly, clean up the surrounding debris to ensure that there is no external interference during cleaning. Choose a sunny day and clean in the morning or evening when there is no strong sunlight to avoid direct sunlight. Damage to the Pattern Braided Sleeve.

① Add an appropriate amount of clean water to the bucket, then add an appropriate amount of detergent and stir evenly.

② Pour the prepared detergent on the Pattern Braided Sleeve, scrub along the grid direction with a soft brush, and pay attention to the strength to be moderate to avoid damaging the Pattern Braided Sleeve.

③After the detergent fully penetrates into the grid, continue to scrub with a soft brush several times until the dirt and dust are cleaned.

④ Rinse the Pattern Braided Sleeve with clean water to ensure that the detergent and dirt are rinsed clean without any residue.

⑤ If the Pattern Braided Sleeve is moldy or has a strange smell, add an appropriate amount of disinfectant or mildew inhibitor to the clean water and then rinse it to ensure the cleanliness and hygiene of the network management.