Water droplets appear on the surface of Nomex Braided Sleeve

Many Nomex Braided Sleeve manufacturers may encounter this problem. During the rainy season in the summer, water droplets will appear on many silicone Special Material Braided Sleeve products such as Special Material Braided Sleeve materials and shoe soles. After the water droplets evaporate, Dots and white spots will also appear on the surface, similar to the phenomenon of "spitting frost"; this problem is very troublesome. The Nomex Braided Sleeve manufacturer will tell you based on ten years of silicon Nomex Braided Sleeve production and processing experience. How to properly handle such a situation.

The reason why water column frost appears on the surface of Nomex Braided Sleeve is mainly caused by excessive use of alcohol, especially diethylene glycol DEG; because DEG has strong hygroscopic side effects. When the amount of DEG in the formula is too large, it will absorb moisture, which is more obvious in summer or rainy season. Therefore, there are more species in summer.
The so-called "frost spitting" means: after absorbing moisture, water droplets will dissolve the water-soluble substances in the formula on the surface of the Nomex Braided Sleeve; after the water evaporates, the water-soluble substances will remain on the surface of the Special Material Braided Sleeve. Reminder: These white dots can be wiped off by hand.
Therefore, if you want to fundamentally solve the problem of water droplets appearing on the surface of Nomex Braided Sleeve, the most important thing is to start from the formula, such as changing the formula or paying attention to the amount of alcohol. Secondly, Nomex Braided Sleeve can be placed in a dry and ventilated environment to ensure the dryness of the product.