What are the detection methods and functions of Stainless Steel Braided Sleeve?

Stainless Steel braided sleeve are one of the basic electronic devices made of semiconductor materials. They have a current amplification function and are an important component of electronic circuits. There are many types of crystalline Stainless Steel Braided Sleeve in China. The distribution of the pins is different, and there is uncertainty during use. When pin-arranging Stainless Steel Braided Sleeve, you must measure to determine the correct position of each pin, or search the transistor operating manual to determine the characteristics of the Stainless Steel Braided Sleeve and related performance parameter data. The Stainless Steel Braided Sleeve must be woven with strong, environmentally friendly and energy-saving PET wire. It is made of strong elasticity, wear resistance, flame retardant grade and elastic function.

To test the performance in the reverse direction, touch the red test lead of the multimeter to the positive level of the Stainless Steel Braided Sleeve, and touch the black test lead to the negative level of the Stainless Steel Braided Sleeve. If the pointer points to a higher value or is close to a higher value, the pipe meets the requirements. Positive direction characteristic detection.
Touch the black test lead of the multimeter (positive level in the meter) to the positive level of the Stainless Steel Braided Sleeve, and touch the red test lead (negative level in the meter) to the negative level of the Stainless Steel Braided Sleeve. If the pointer is not placed at the 0 value, it will stop at the scale. In the middle of the disk, the resistance value at this time is the positive resistance of the Stainless Steel Braided Sleeve. Generally, the lower the positive resistance, the better. If the positive resistance is 0, it means that the core tube is damaged due to short circuit. If the positive resistance is close to the larger value, , indicating that the core tube is short-circuited, and short-circuited and open-circuited pipes cannot be used.
Electronic switch, Stainless Steel Braided Sleeve has little resistance under the influence of forward voltage and is in the on state, which is equivalent to an connected power switch; under the influence of reverse voltage, the resistance is very large and is in the cut-off state, just like a The switch that is only disconnected, using the switching characteristics of the Stainless Steel Braided Sleeve, can form a variety of sequential logic circuits to detect the Stainless Steel Braided Sleeve, and the recorder plays the detection function.
Variable capacity Stainless Steel Braided Sleeve are used in high-frequency heads of TVs as limiting components. After the Stainless Steel Braided Sleeve are forwarded, the forward voltage drop remains basically the same (0.7V for silicon tubes and 0.3V for germanium tubes). Use this One feature is that as an amplitude limiting component on the circuit board, the signal amplitude can be controlled within a range, and the AC current such as the inductor and solenoid valve in the switching power circuit plays a relay role.