What are the main usage methods of PEEK Braided Sleeve?

PEEK Braided Sleeving is one of the most common products today. Although this product is often used by people, not many people pay attention to the application of PEEK woven sleeving. Therefore, I will tell you about PEEK woven sleeving. Frequently asked questions about the use of braided sleeves, so that everyone can have a better understanding of PEEK braided sleeves.

Peek Braided Sleeve, also known as hollow belt and wire protection sleeve, is made of polyester multifilament or polyester textile. It has the characteristics of degreasing and anti-fouling, anti-corrosion and noise reduction, anti-corrosion and explosion-proof lamps. It can be widely used in industrial equipment, agricultural machinery and equipment, urban rail and other industries, and has a guarantee function.
Because it is a closed acne sleeve, you must know the large diameter of the product before purchasing, and then the PEEK Braided Sleeve must be selected to be slightly larger in size, which is convenient for stringing and threading pipes. In general, if it is used to wrap a pipe or cable For wires, it is recommended to choose a PEEK Braided Sleeve with a size of about 2mm larger. If it is used to wear multiple pipes or electronic wiring harnesses, you can choose a sleeve with a larger size of 5mm.
In addition, because the closure of the PEEK braided sleeve requires an overlock process to prevent it from falling apart, it is recommended to pull the port number horizontally when viewing the product to see if it is cracked. Of course, this problem cannot occur in general, just in case.
PEEK braided sleeve is a kind of moisture-proof sleeve with simple structure, which is often used in the maintenance of pipelines passing through walls in construction projects. The structure of PEEK braided sleeve is relatively simple. It is mainly composed of steel pipes and wing rings. Relatively long flexible waterproof casings usually consist of 2-3 wing rings. Some people will definitely ask, can steel pipes replace PEEK Braided Sleeve applications at the same time?
In some areas where regulations are more relaxed, steel pipe can be used in place ofPEEK Braided Sleeve, since PEEK Braided Sleeve have an additional wing ring compared to steel pipes. In such a case, what is the use of lifting a wing ring? It is easier to use steel pipe directly. In fact, this is not the case.
The pipe passes over the moisture-proof casing and immediately touches the moisture-proof casing. When the pipeline is running normally, the water flowing through the pipeline will have a flow velocity, which will also cause mechanical energy. Therefore, a normal running pipeline is not easy to move at all, but will keep shaking. During the continuous shaking of the pipeline, the steel pipe will also be subjected to internal stress.
In the long run, the steel pipe is likely to shake, causing the steel pipe to lose its role in protecting the pipeline. However, if the wing ring is lifted, it will be different. The wing ring is a circle, welded to the steel pipe by electric welding. The main function of the wing ring is to prevent the vibration of the moisture-proof casing, which is more prominent for a fixed moisture-proof casing.
This is also the key difference between PEEK Braided Sleeve and steel pipe. Therefore, PEEK Braided Sleeve and rigid waterproof casing are essentially different. Although the PEEK Braided Sleeve has only one more wing ring than the steel pipe, it is precisely because of this type of wing ring that the application of the PEEK braided sleeve is more common and the effect is more prominent.