What are the reasons and solutions for the Silicone Glass Fiber Tube to absorb dust?

Silicone material does have powerful practical functions, and one of them is that it is both beneficial and harmful. Dust and impurities are one of the weakest shortcomings of Silicone Glass Fiber Tube, and the adsorption force is the main chemical nature of silica gel. Therefore, many Silicone Glass Fiber Tube on the market cannot get a solution to dust and debris. Silicone coasters are one of them in life. So what are the main reasons for the adsorption of dust by Silicone Glass Fiber Tube and what are the solutions?

First of all, dust, sticky debris and other phenomena are the bulk chemistry of silica, and the phenomenon of adsorption is an inevitable factor among raw materials. Therefore, for the use of Silicone Glass Fiber Tube in daily life and textiles, plush, etc. There will definitely be stickiness, but this kind of phenomenon needs to be dealt with and solved by the silicone glass fiber tube processing factory.
It should be known that the adsorption force is the main reason for the accumulation of dust in the silica gel glass fiber tube, so in the raw materials, the additives in organic silicon and inorganic silicon are different, and the adsorption methods are different, which can reduce the silicon chain structure unit in the silica gel material. While mixing raw materials, a large amount of water is added to destroy the adsorption strength of silanol and reduce the active ratio in silica gel adsorption.
The Silicone Glass Fiber Tube after molding are all without secondary treatment process, so the surface will have the ability to automatically absorb dust, and the electrostatic oil can be sprayed on the surface to cover the static electricity and prevent the adsorption ability. There are two treatment methods: one is to use anti-static glue before the processing and production of Insulation Tubes to control the adsorption energy and (reduce the anodicity) of silica gel in the raw materials, and the other is to spray oil on the produced silica gel products. Spray anti-static oil on the surface of silicone products to achieve a smooth, non-static effect.