What is the quality of PEEK braided sleeve?

Why must the Peek Braided Sleeve harness be wrapped with a flame-retardant bellows instead of other things. Because the flame-retardant corrugated tube has its unique function in protecting the wire harness, the PEEK braided tube is very soft and can be bent into different angles according to the needs, which is unmatched by other materials. Secondly, it can withstand high temperature, fire and flame retardant, Easy to operate, economical and applicable. At the same time, the flame-retardant bellows of automobile wiring harness can also be resistant to acid and alkali, corrosion, oil and other characteristics.

Hydroforming of automotive bellows Hydroforming is the most common forming method for automotive bellows. Utilizing the liquid pressure in the tube blank, the tube blank is bulged in the restraining ring until it bends along the ring direction, and then the tube blank is compressed to the required length. This method is often used for small-diameter automotive bellows.
PEEK Braided Sleeve has the characteristics of strength and toughness. The hot melt adhesive cures quickly, has low pollution, and strong adhesion. The adhesive layer has certain flexibility, hardness, and certain toughness. Therefore, the hot melt adhesive cannot be placed for a long time. What is the quality of the PEEK Braided Sleeve so that it cannot be used due to the inner layer of adhesive bonding. If it is to be stored for a long time, it should also be placed in a room temperature and ventilated environment, which will increase its storage period
Flame retardant corrugated pipe is made of radiation cross-linked polyolefin material with excellent physical, chemical and electrical properties. Its main functions are electrical insulation of connectors, anti-rust and anti-corrosion of solder joints, mechanical protection and wire harness protection, etc. It is widely used in power cables, electronics, communications, etc. , machinery and automobile manufacturing and other fields.
PEEK braided casing has low thermal conductivity, although the engine temperature is high, it will not affect the normal operation of other surrounding components, and will not cause adverse effects on the operation of the car. In addition to the engine, flame-retardant PP plastics are also used in other parts of the car. Different car brands and models are used in different places, such as car relays, etc.
Welded and formed automobile bellows For automobile bellows with excessive wave height or special waveform, the stamping welding process is mostly used. When the wave height exceeds the limit, the elongation of the material does not allow the use of the overall forming process, or when the overall forming is extremely difficult due to the complex waveform, welding forming is often used. This type of automotive bellows is not suitable for flexible sections of expansion joints because they cannot withstand internal pressure.