What should be paid attention to when using the Automotive Wiring Harness Protection Sleeve in winter?

In winter, the protective sleeve of the automobile wiring harness will be damaged to varying degrees due to the phenomenon of thermal expansion and contraction. So what should be paid attention to when using the Automotive Wiring Harness Protection Sleeve in winter to minimize the damage? The following editor will introduce in detail what you need to pay attention to when using the Automotive Wiring Harness Protection Sleeve in winter.

1. Do not twist the protective cover of the Automotive Wiring Harness Protection Sleeve during installation, otherwise it will cause damage to the protective cover of the automotive wiring harness or loose connections. When the bending radius of the automotive wire harness protective sleeve is too small, a right-angle joint should be used to avoid sharp bending and twisting of the automotive wiring harness protective sleeve. In normal operation, the valve stem should not be pulled too hard, but must be gentle, otherwise it will cause the automobile wiring harness protective cover to burst. In order to avoid the damage of the automotive wire harness protective sleeve and the flow restriction, the bending radius of the automotive wiring harness protective sleeve should be increased as much as possible.
2. During the production operation, the hydraulic system of the Automotive Wiring Harness Protection Sleeve is overheated, and the Automotive Wiring Harness Protection Sleeve should be checked in time, and necessary cooling measures should be taken during continuous operation. When installing the Automotive Wiring Harness Protection Sleeve between objects, a certain space should be left to avoid friction between the Automotive Wiring Harness Protection Sleeve and the object during operation. If you can't avoid it, try to take some protective measures. For example, use a car harness to protect the sheath. The most important thing is that the selection of the Automotive Wiring Harness Protection Sleeve must be reasonable.
3. Do not expose the Automotive Wiring Harness Protection Sleeve to the sun, because it will increase the temperature when exposed to the sun, and ultraviolet rays will also reduce the service life of the Automotive Wiring Harness Protection Sleeve.