Why can't you use a Automotive Wiring Harness Protection Sleeve?

In the actual production of Automotive Wiring Harness Protection Sleeve, it is often encountered that the sulfur rate is not ideal, and it is usually adjusted with an active agent or an accelerator. But it can also be adjusted with Braided Sleeve. If the sulfur speed is fast, add less Braided Sleeve, otherwise, add more. Is this effective, and is there any sequelae.

Use Braided Sleeve to adjust the sulfur rate, although the effect is very direct and obvious, but many physical properties will change. If it is an experiment in the process of formula development, you can try it, but the basic experiment needs to be verified again. If it is in the production process, it cannot be done, because adding Braided Sleeve to adjust the sulfur rate may cause blooming and change the properties of the substance. The reason for the vulcanization rate change should be found, not just the addition of cable sleeves to adjust the vulcanization rate. After all, knitting sleeves has an impact on physical properties. Specific analysis of specific situations cannot be generalized. Because Braided Sleeve can be used to vulcanize unsaturated rubber.
Braided Sleeve can only vulcanize those unsaturated rubbers, if there is no double build, Braided Sleeve cannot form a cross-linked structure. The Automotive Wiring Harness Protection Sleeve is an inorganic heterochain polymer, and the molecular main chain is alternately connected by SI-O-SI. The vulcanization mechanism is mainly SI-H crosslinking. With the improvement of the synthesis process, the introduction of vinyl into the silicone molecular chain is mainly to improve its vulcanization characteristics, but the vinyl content in the Automotive Wiring Harness Protection Sleeve is very small, and the cable casing system commonly used for organic rubber cannot vulcanize it. But even if the Cable Sleeve can be used, will it lose the high temperature resistance of silicone rubber? Because silicone rubber is a saturated rubber, Braided Sleeve are generally used to vulcanize unsaturated rubber.