Why does PET Self Wrap Braided Sleeve have dimensional deviation?

No matter what the product is, only precise dimensions can be used, so the production process in all walks of life requires the product size to be within tolerance. The forming of Cable Sleeve parts also has size requirements and tolerance ranges. In the PET Self wrap braided sleeve, there are many Cable Sleeve parts that have dimensional deviations, so how do we control the dimensional deviations of the Cable Sleeve parts in the daily production process? Let`s take a look with the editor below.

1. Higher than the mold temperature: Increase the temperature during the molding process, knowing that the higher the temperature of the molding mold is, because of the temperature, the raw material of the braided network pipe can be shaped according to the molding mold. The fluidity of the raw material is also close to the grinding activity, and the fluidity of the raw material is relatively poor. There will be no error relationship between the size of the molded product and the expected size.
2. When the PET Self Wrap Braided Sleeve is formed: apply a force to the raw material, and through a moderate force, we can compress the raw material of the Cable Sleeve to a fixed size. Because, if the pressure is too large, the thickness becomes thinner and the size becomes relatively larger. Therefore, in terms of molding pressure, we should reasonably grasp a certain degree.
3. The design of the mold itself: If the designed product is not strict enough and qualified, some errors will be found no matter how the size is adjusted during production. Therefore, we must pay attention to the precision of the mold when opening the mold, and there should be no error in the size of the product. Generally speaking, there are some problems with the mold itself in the silicon product production industry, but we cannot rule out this reason.
4. Cable Sleeve raw material: Sometimes we may put too much Cable Sleeve raw material. If the volume or weight of the Cable Sleeve raw material exceeds the volume or weight required for our product production, it is also easy to make mistakes after the Cable Sleeve product is formed.