Why process Silicone Glass Fiber Tube

It is not easy to bend, and is often used by customers in nuclear power plants, power supplies and other fields that require heat dissipation for wire and cable protection, and the unit price will be more expensive. So, unless specifically requested.

For testing, the testing standards for Silicone Glass Fiber Tubes are defined differently by each manufacturer. The joints are also formed. The joints that appear when the Silicone Glass Fiber Tube blank tube is packed, the excess needs to be cut off for a roll of 100 meters, and then connected to another Silicone Glass Fiber Tube to make up a full 100 meters for packing. How to avoid or reduce joint out.
Of course, it is to improve the quality of raw materials and improve the process requirements to reduce the number of inspections of Silicone Glass Fiber Tubes. Choose according to the nature of the dust. The properties of the dust mainly include concentration, particle size, viscosity and corrosiveness, etc., which are also the main factors affecting the selection of filter materials for the dust collector. If the dust concentration is high, a lower filtration wind speed should be selected, and the negative pressure design and the ability to store and discharge ash should also be considered. If the dust concentration is low, a higher filtration wind speed should be selected appropriately.
It can effectively ensure the working efficiency of the vehicle circuit, and the aging braided network pipe can ensure that the wiring harness does not absorb dust, so that the engine compartment wiring harness is as bright as new. PET braided net tube is a kind of stretchable net tube.
There is no car circuit without a wiring harness. At present, whether it is a high-end luxury car or an economical general car, the form of wiring harness is basically the same, which is composed of wires, connectors and wrapping tape. The metal braided network pipe must not only ensure the transmission of electrical signals, but also Ensure the reliability of the connecting circuit, supply the specified current value to the electronic and electrical components, avoid electromagnetic interference to the surrounding circuits, and eliminate electrical short circuits. The car wiring harness is divided by function.
Therefore, after wrapping the wire harness, it will generally be stretched out. The greater the expansion, the sparser it will generally appear. However, some fields and some customers want to appear more compact, so what should we do?
The service life in the natural environment can reach several decades, which can protect the pipelines, cables and equipment in these places to the greatest extent, and greatly extend their service life. Ozone resistance, voltage resistance, arc resistance and corona resistance.
There are several reasons for the joints of Silicone Glass Fiber Tubes: the raw material tubes of Silicone Glass Fiber Tubes have joints, and the raw material manufacturers of glass fiber blank tubes are uneven. According to the raw materials learned by the editor, there are 46% of glass fibers. The blank tube is bad, which will lead to joints in the finished silicone fiberglass tube. During the painting process of the Silicone Glass Fiber Tube blank tube, the semi-finished product of the Silicone Glass Fiber Tube will be defective. new connectors.