Analysis on the reverse characteristic test of PEEK braided sleeve

With the continuous development trend of economy and society, the things we use are also constantly changing. For example, Peek Braided Sleeve is an effective case. With the development trend of PEEK Braided Sleeve, we aim at PEEK Braided Sleeve The tube is getting more and more mastered. What I want to tell you about the PEEK braided sleeve is the reverse direction test of the PEEK braided sleeve.

In the reverse direction characteristic test, touch the red pen of the multimeter to the positive pole of the PEEK braided sleeve, and touch the black pen to the negative pole of the PEEK braided sleeve. If the gauge stem is at or close to a large value, the pipeline will be fine. is standard.
For the positive direction characteristic test, touch the black pen of the multimeter to the positive pole of the PEEK braided sleeve, and touch the red pen to the negative pole of the PEEK braided sleeve. If the pointer is not placed at 0 but stops in the middle of the dial, the resistance at this time is the positive direction resistance of the PEEK braided sleeve. Generally, the lower the positive direction resistance, the better. If the positive direction resistance is 0, it means that the core tube is short-circuited and damaged. If the positive direction resistance is close to the maximum value, it means that the core tube is short-circuited, and the short-circuited and open-circuited tubes cannot be used.
Electronic switch, PEEK braided sleeve has little resistance under the action of positive direction working voltage, and is in the on-off state, which is equivalent to a connected power switch; under the action of reverse direction current, the resistance is very large, and it is in the cut-off state , like a broken switch, using the switch characteristics of the PEEK braided sleeve, various sequential logic circuits can be formed. Detecting PEEK braided sleeve, which plays the role of detecting in the recorder. Variable volume PEEK braided sleeve, used in the tuner of the TV.
Limiting components, after the PEEK braided sleeve is positively guided, the pressure drop in the positive direction will basically remain unchanged. The silicon tube is 0.7V and the germanium tube is 0.3V. Using this feature, it is used as a limiting component in the power circuit. It can limit the strength of the data signal in the area, and the PEEK braided sleeve, the inductor of the switching power supply circuit and the automobile relay can play the role of following the AC current.
The iron oxide formed on ordinary carbon steel is oxidized again, which makes the rust continue to expand and form holes. In order to better protect the surface of carbon steel, paint or oxidation-resistant metal materials can be used for electroplating, but this is only a protective film. If the protective layer is damaged, the steel below will begin to rust.
In order to prevent further oxidation, the stainless steel plate has a uniform surface, and the gloss of the stainless steel plate surface can be seen through this oxide layer. If the surface is damaged, the steel surface will continue to repair itself with the air, thus forming a "passive film" to continue to play a protective effect.
PEEK braided sleeve has the characteristics of corrosion resistance, rust resistance, shielding of static induction, etc., and can efficiently ensure the working efficiency of the car power circuit; the embrittled PEEK braided sleeve can ensure that the wire harness does not absorb dust and makes the engine compartment wire harness bright like New.