Introduction to the Causes of Imbalance in the Compression Ratio of Oversized PET Braided Mesh Pipes

Super-sized PET braided network pipes can generally be divided into double-headed pipes, braided pipes, and shower pipes according to the above functions. The production process of oversized PET braided mesh pipes can also be divided into low, medium and high grades. Inferior oversized PET braided network pipe materials use relatively low-end aluminum wires with finer pitches, iron screw caps, zinc alloy shells, and vulcanized rubber connecting pipes. In this article, we will talk about the reasons for the unbalanced compression ratio of oversized PET braided network pipes.

With the rapid development of the Braided Sleeve field, people's demand for products is getting higher and higher. The Stainless Steel braided sleeve gradually replaces the bellows used in traditional automobiles. It is made of polyester fabric and has no stretchability. The casing has the characteristics of light weight, good flexibility, abrasion resistance, sound reduction, and high cost performance. The main reason is that it has the advantages of corrugated pipes, which can save more space than corrugated pipes, and fill in the major deficiency that corrugated pipes are not easy to bend.

Therefore, stainless steel braided sleeves will be popular in fields with high safety requirements such as automobiles, high-speed rail trains, and machinery and equipment manufacturing. Because it can not only protect the wire harness cable, but also bring the appearance effect, especially in the wire harness industry that is suitable for irregular shapes, the open-mouth structure is more conducive to internal wire harness maintenance, reinstallation, maintenance and repair.

1. The size adjustment of the mold on the machine is wrong, which will cause the proportion of the normal compression ratio to be disordered in the whole process of weaving, resulting in disconnection. The solution is to ensure the machine specifications of the mold.

2. The oil or water is cut off during the whole process of the mold on the machine, causing the hole distance of the mold to run in a short period of time, the compression ratio is disordered, and the wire is broken. The solution is to immediately lubricate each die to ensure it cools down and lubricates.

3. When wicker threads are produced during the weaving process, the stainless steel mesh will break if the angle is too fast. The solution is to replace the mold to ensure that the wicker thread problem does not occur.

4. The consumption of a certain path in the mold is too fast, resulting in an unbalanced compression ratio of front, rear, left, and right in the oversized PET braided network pipe, resulting in broken wires, which are specifically manifested as several broken wires in one part. The solution is to replace the mold and adjust the front and rear left and right compression ratios until everything is normal.

The oversized PET braided mesh tube is woven with PET and other raw materials, which has excellent friction resistance coefficient, expansibility, smoothness, flame retardant grade and air permeability and heat dissipation characteristics. Products are widely used in computer power lines, speaker monitoring video lines, lighting, central air conditioning, refrigerators, washing machines and other electrical products, as well as the maintenance and cleaning functions of optical cables, motorcycles, vehicles, airports and other routes. Users need to use brushed or three-wire weaving of different widths, different colors, and different patterns of colorful super-large PET braided network pipes.