Causes of Breakage in 100% PET Self Wrap Braided Sleeve

100% PET Self Wrap Braided Sleeve is widely used in the field of sealing because of its superior elasticity and compression resistance, which can effectively prevent the leakage of media; it is precisely because it is widely used that its use scenarios and application environments All have diversity and uncertainty, these are the important reasons that lead to the frequent failure of 100% Pet Self Wrap Braided Sleeve, among which fracture is an important phenomenon of failure, and fracture accounts for more than 80% of the bad quantity; then What are the possible reasons for the breakage of the 100% PET Self wrap braided sleeve? The following editor will briefly introduce it.

1. Overload
Each material and product has its own safe load capacity, and 100% PET Self Wrap Braided Sleeve is no exception; for example, the rated load of the rubber ring is 10N, while the working environment has a force of 20N , In the case of this kind of overload, it is easy to break. Therefore, when designing the product, you must consult the relevant information to see how much the load of the product is, and whether the product is overloaded. Generally, it does not exceed 90% of the product. The load is relatively safe.
2. Material aging
In many cases, material aging is also an important reason for fracture. Each material has its own lifespan. After long-term use and aging beyond its own lifespan, it will break; the product will become hard and brittle when it ages, and stress concentration will occur on the gap leading to fracture. , so the 100% Pet Self Wrap Braided Sleeve on mechanical products needs to be replaced in time before aging and fracture, so as to avoid safety accidents due to broken aprons.
3. The product is corroded
It is easy to understand the situation that the product breaks after being corroded. For example, the material of the Cable Sleeve is not oil-resistant. If the Cable Sleeve is used in an oily environment for a long time, it is easy to be corroded and broken; there is also chemical corrosion. It is easy to break without using the Cable Sleeve in the environment. Only the Cable Sleeve has the characteristics of corrosion resistance. Therefore, when selecting the material of the product, it is necessary to understand the material characteristics and the environmental medium. Only when the material matches the medium used The product can play its best role.