Causes of Imbalance of Front and Back Compression Ratio in PET Braided Sleeve

PET Braided Sleeve have strong elasticity, good stretchability, and good wear resistance. The spare room can be used normally between -40°C and 150°C. The flame retardant performance is 94-V0, which is highly flame-retardant, fire-resistant, and radiation-proof. ;Generally, the Braided Sleeve are woven with UV fluorescent light, and the PET braided sleeve with high flame-retardant braided belt pull can be customized according to customer requirements.

In the shielding state of the high-speed machine, the use of Pet Braided Sleeve can be used for processing. Under ordinary criminals, the effect of the wire is very small, but as long as it is used in tin-plated, copper, steel-clad wire, aluminum, magnesium and other products , PET Braided Sleeve characteristics are obvious.
1. The size adjustment of the machine on the mold is wrong, which will cause confusion in the ratio of the normal compression ratio during the weaving process, resulting in broken threads. The solution is to ensure the size of the mold on the machine.
2. The oil or water is cut off during the mold loading process, causing the mold to run a large hole distance in a short time, and the compression ratio is out of balance, thus breaking the wire. The solution is to add lubricant to each mold in time to ensure its cooling and lubrication.
3. When there are wicker threads in the weaving process, the stainless steel mesh will break if the take-up speed is too fast. The solution is to replace the mold to ensure that the phenomenon of wicker silk will no longer occur.
4. A certain block in the mold consumes too fast, which causes the front and rear compression ratio of the PET woven sleeve to be out of balance, and broken wires appear, mainly manifested as several broken wires in one position. The solution is to replace the mold and adjust the compression ratio before and after until it is normal.
PET Braided Sleeve have strong elasticity, good stretchability, and good wear resistance. The spare room can be used normally between -40°C and 150°C. The flame retardant performance is 94-V0, which is highly flame-retardant, fire-resistant, and radiation-proof. ;Under normal circumstances, under the UV fluorescent weaving state, the highly flame-resistant braided pull-type PET woven sleeves can also be customized according to customer requirements. In the shielding state of the high-speed machine, the use of PET Braided Sleeve can be used for processing. Under ordinary criminals, the effect of the wire is very small, but as long as it is used in tin-plated, copper, steel-clad wire, aluminum, magnesium and other products , and its characteristics are obvious, the shielding mesh is woven and the aluminum hidden is wrapped around the state of the company's colorful PET woven sleeves. Its material is the best, because it is made of PET, which is effective in the protection and tightening of computer wires. It is easy to bend and can be loosened and tightened. Its good scalability has a good explanation for it. The fire rating is UL94V. -2, Believe that flexible bend lead operation is the beginning of product certification.