How to extend the service life of PET Braided Sleeve?

PET Braided Sleeve is a high-performance network tube that combines flame retardant and halogen-free. It is woven with PET and has good softness, flame retardancy, wear resistance and heat insulation. It can also be customized according to customer requirements. Weave web tubes in different patterns and colors. It can meet the requirements of various industrial fields, especially its Cable Sleeve structure can be expanded to 1.5 times larger than the original size, which is more suitable for wrapping wire harnesses.

1. Add a leather pad to the edge of the screen frame to make the friction of the PET woven sleeve on the edge soft. Generally, the center of the PET braided sleeve a large force, that is to say, the friction between the central PET woven sleeve and the lining net is serious, and the screening effect of this piece is just poor. So the five centimeters in the center of the Pet Braided Sleeve are also separated by a rubber pad. In this way, the rigid friction between the PET Braided Sleeve and the lining mesh and the edge of the PET Braided Sleeve is reduced, so that the service life of the PET Braided Sleeve can be improved by three to five times of the original.
2. The mesh size of the PET Braided Sleeve is determined by the wire diameter and the aperture. At this time, we need to determine the diameter of the braided wire to increase the wire diameter while the aperture remains unchanged, and then use a PET Braided Sleeve with high hardness. So that the PET woven sleeve will not wear the screen hole in a short time.
3. In the process of some high-definition viscous pulp filtration, the PET Braided Sleeve is often damaged from the edge and the middle. Because the number of PET Braided Sleeve used to filter ceramic slurry is large and the price is also expensive, saving PET Braided Sleeve is also saving production costs.
The number of spindles refers to the total number of threads woven by the Cable Sleeve tube. PET Braided Sleeve of each spindle number need to be woven with a knitting machine corresponding to the number of spindles; the simple confirmation method is to cut a section and count the number of pet filaments, or use The number of strands of pet wire in the same cross section.