Causes of out-of-proportion compression Nylon Braided Sleeve

Nylon Braided Sleeve are the products of manufacturers in our daily life. Occasionally, there will be some problems in the production of Nylon Braided Sleeve. For example, today I will tell you about the reason why the compression ratio of Nylon Braided Sleeve is out of balance. Then I will tell you about the compression ratio of Nylon Braided Sleeve. Causes of disproportion and how to fix it.

Nylon braided sleeve is one of the basic components of semiconductors. It has the function of current amplification and is the core component of electronic circuits. However, with the development of nylon braided sleeve, its use has become more and more extensive.
Nylon braided sleeve In the metallurgical industry, high-temperature molten steel is often splashed out, and unprotected pipes or wires will be damaged. In addition, these molten steels will form slag after solidification on the pipes or wires, which will make the outer layer of the pipes or wires The rubber hardens and eventually becomes brittle and cracked. The nylon braided sleeve can protect the pipes, wires and equipment in these occasions to the greatest extent, and greatly extend its service life.
1. When wicker threads appear during the weaving process, the Nylon Braided Sleeve will be broken if the take-up speed is too fast. The only solution is to replace the mold to ensure that the phenomenon of wicker threads will not happen again.
2. A certain piece of natural road consumption in the mold is too fast, causing the front and rear compression ratio of the nylon braided sleeve to be out of balance, and broken wires appear, mainly manifested as several broken wires in one position. normal.
3. The size adjustment of the mold on the machine is wrong. During the knitting process of the nylon knitting sleeve, the ratio of the normal compression ratio will be confused, resulting in thread breakage. The solution is to ensure the absolute size of the mold on the machine.
4. The oil or water is cut off during the mold loading process, causing the mold to run a large hole distance in a short time, and the compression ratio of the nylon braided sleeve is out of balance, so the wire is broken. The solution is to add lubricant to each mold in time to ensure its cooling. and lubricated.
Nylon Braided Sleeve are made of environmentally friendly PET silk, which has good scalability, flame retardancy, wear resistance and heat insulation. The product has a smooth surface, bright color and various patterns. The product is widely used in computer power lines, audio and video Wire, automobile, aviation, wire and cable and other industries, for protection and beautification, and can also be customized according to customer requirements in various colors, patterns and UV fluorescent colors.