How to improve the service life of 100% PET Self Wrap Braided Sleeve

100% PET Self Wrap Braided Sleeve has high heat sealing performance and adhesive properties, 100% PET self-wrapped Braided Sleeve is inherently elastic and good toughness, and is compatible with many polyolefins , These will bring inspiration to the innovation and product development of 100% PET Self Wrap Braided Sleeves for various flexible packaging. Let me tell you about the relevant knowledge of 100% PET self-wrapped braided sleeves.

100% PET self-wrapped braided sleeve is one of the basic components of semiconductors, which has the function of current amplification and is the core component of electronic circuits. There are many types of crystal 100% PET Self Wrap Braided Sleeves in China, and the arrangement of the pins is not the same. The 100% PET self-wrapped braided sleeve with uncertain pin arrangement is not sure in use.
It is necessary to measure to determine the correct position of each pin, or look up the transistor manual to clarify the characteristics of the 100% PET self-wrapped braided sleeve and the corresponding technical parameters and materials. The 100% PET self-wrapped braided sleeve is made of tough Woven from environmentally friendly PET monofilament, it has strong stretchability, wear resistance, flame retardancy and elasticity.
All products have a service life, and at the same time, the service life will be reduced or increased due to various reasons, so how to improve the service life of 100% PET self-wrapped braided sleeve, let`s talk about it below How to improve the service life of 100% Pet Self Wrap Braided Sleeve.
The mesh size of 100% PET self-wrapped braided sleeve is determined by the aperture and wire diameter. At this time, we have to determine to increase the wire diameter while the aperture remains unchanged, and then use 100% of high hardness. PET self-wrapping braided sleeve, so that the 100% PET self-wrapped braided sleeve will not wear the screen hole in a short time.
The other is that it will appear in the process of high-precision viscous slurry filtration for a while. The most common one is that the 100% PET self-wrapped braided sleeve is often damaged from the edge and the middle during the process of sieving ceramic slurry, because the filter The 100% PET self-wrapped braided sleeve used in ceramic slurry has a high mesh number and is also expensive, so saving 100% PET self-wrapped braided sleeve means saving production costs.
We add a leather pad to the edge of the screen frame to make the friction of the 100% PET self-wrapped braided sleeve on the edge soft, and the center of the general 100% PET self-wrapped braided sleeve is the most stressed, that is to say The 100% PET Self wrap braided sleeve in the center has the worst friction with the liner, and this piece has the worst screening effect.
Therefore, we also separate the 5cm of the center of the 100% PET Self Wrap Braided Sleeve with a rubber pad, so that the rigid friction between the 100% Pet Self Wrap Braided Sleeve and the liner and the edge of the 100% PET self-wrapped braided sleeve can be avoided. The test proves that the service life of the 100% PET self-wrapped braided sleeve can be increased by 3 to 5 times.