Factors affecting Open Type Braided Sleeve and solutions

The PET Self wrap braided sleeve in the Open Type Braided Sleeve has been stuck and pressed against metal for a long time. After frequent stress, the PET Self Wrap Braided Sleeve will not rebound or be stressed. Some Open Type Braided Sleeve has been used in harsh environments for a long time, such as oxygen, heat, and light, which cause aging and phase change. Therefore, in the early stage, the use environment and time of Pet Self Wrap Braided Sleeve need to consider the material and Whether the product can maintain a long life, its elasticity is not affected, etc.

1. During use, various high and low temperatures are a major factor affecting the product. Although the Braided Sleeve material can withstand high temperatures from more than 200 degrees to -40 degrees, long-term use in harsh heat conditions will accelerate the degradation of 100% PET. As the winding Braided Sleeve ages, the higher the temperature, the greater the deformation of the product. The maximum stress deformation of the Braided Sleeve material is generally more than 40%, which will completely lose working performance, leading to seal leakage and other reasons.
When using it at low temperatures, it is recommended to increase the amount of compression and stretch appropriately. When using it at low temperatures, you need to pay attention to the phenomenon of product necrosis and deformation and rupture.
2. Stretchability is one of the main operating capabilities of PET Self Wrap Braided Sleeve. Therefore, when producing Braided Sleeve products, manufacturers will choose corresponding tensile strength materials and usage conditions of various hardnesses, so for long-term repeated use When needed, you can choose high-tensile Braided Sleeve to be processed and produced to prevent the product from affecting the performance of the product over time. Due to the long-term operation of the Open Type Braided Sleeve, the product will often become loose when used beyond the tensile range. , loses tensile force, so under sufficient conditions the work intervention stretch is reduced, which is the biggest factor affecting the deformation of the Braided Sleeve material during long-term use.
Therefore, reducing the working pressure is the best way to maintain an Open Type Braided Sleeve. In addition, high-quality materials are used for product performance. The higher the high tensile strength and product hardness, the better the product quality.