Pay attention to these three aspects to maintain your 100% PET Self Wrap Braided Sleeve

100% PET self-winding braided casing. During long-term adhesion and metal pressing and extrusion, the 100% PET Self Wrap Braided Sleeve will not rebound or be stressed due to frequent stress. As a manufacturer, Ruibo will Three angles tell you how to maintain and use 100% Pet Self Wrap Braided Sleeve for a long time.

Some Open Type Braided Sleeve have been used in harsh environments for a long time, such as oxygen, heat, and light, which cause aging and phase change. Therefore, in the early stage, the use environment and time of 100% PET Self wrap braided sleeve need to be considered. And whether the product can maintain a long life, its elasticity is not affected, etc. Generally, we start from these three aspects.
During use, various high and low temperatures are a major factor affecting the product. Although silicone material can withstand high temperatures from more than 200 degrees to -40 degrees, long-term use in harsh heat conditions will accelerate the degradation of the 100% PET Self Wrap Braided Sleeve. The aging of the tube and the higher the temperature, the greater the deformation of the product. The maximum stress deformation of the silicone material is generally more than 40%, which will completely lose the working performance, leading to seal leakage and other reasons. When using it at low temperatures, it is recommended to increase the amount of compression and stretch appropriately. When using it at low temperatures, you need to pay attention to the phenomenon of product necrosis and deformation and rupture.
Stretchability is one of the main operating capabilities of 100% Pet Self Wrap Braided Sleeve. Therefore, when producing silicone products, manufacturers will choose corresponding tensile strength materials and usage conditions of various hardnesses, so it can be used for long-term repeated use. Choose high tensile strength silicone material for processing and production to prevent the product from affecting the performance of the product over time. Since silicone rubber is used for a long time and exceeds the tensile strength range, the product will often become loose and lose tensile strength. Therefore, when sufficient Reducing the working intervention stretch under the conditions is the biggest factor affecting the deformation of the silicone material during long-term use. Therefore, reducing the working pressure is the best way to maintain an Open Type Braided Sleeve.
In addition, high-quality materials are used for product performance. The higher the high tensile strength and product hardness, the better the product quality.