How much do you know about Stainless Steel Braided Sleeve?

The diameter of the network tube of the Braided Sleeve can be changed with the diameter of the wire. Stainless steel braid material: tinned copper wire, 304 stainless steel wire, copper wire, packing quantity: usually the packing length is 200m/RL, 305m/RL, 500m/RL, stainless steel braided product size range: medium 3,0mm-p40,0mm, stainless steel braided is made of high-quality stainless steel alloy nickel-chromium wire.

In general, under the state of UV fluorescent braiding, the flame-retardant braided sleeve with pull-type network pipes can also be customized according to customer requirements, under the shielding state of the high-speed machine.

Through this oxide layer, the luster of the stainless steel surface can be seen. If the surface is damaged, the steel surface will repair itself with the atmosphere, thus forming a "passive film" and continuing to play a protective role.
Glass fiber casing is a kind of product in high temperature casing. In some places, glass fiber casing is also called ceramic fiber casing. Generally, when we say high temperature casing, most of them refer to glass fiber casing. Glass fiber casing is because of its Its high temperature resistance is used by many companies for high temperature protection of equipment. Now companies use more fiberglass woven sleeves, and the outside is brushed with silicone, which has the functions of high temperature resistance, dust resistance and tear resistance.
The reason why Stainless Steel braided sleeve are expensive is that the quality of their products has always been in accordance with national standards. For example, Stainless Steel Braided Sleeve will shrink.
Inspection, glass fiber pipe inspection standards are defined differently by each braided casing manufacturer, which also leads to some inconsistencies in the joints. For example, if the length of A is 100 meters and is inspected twice, it is necessary to cut a section every 50 meters for inspection. The rest is connected to form a joint; the joints that appear when the glass fiber tube blank tube is packed, the excess needs to be cut off for a roll of 100 meters, and then connected to another glass fiber tube to make up a full 100 meters for packing; How to avoid or reduce joint out.
Of course, it is to improve the quality of raw materials, improve the process requirements, and reduce the number of inspections of glass fiber tubes in general. Choose according to the nature of the dust. The properties of the dust mainly include concentration, particle size, viscosity and corrosiveness, etc., which also affect the selection of filter materials for the dust collector. The main factor is that if the dust concentration is high, a lower filtration wind speed should be selected, and the negative pressure design and the ability to store and discharge ash should also be considered; if the dust concentration is low, a higher filtration wind speed should be selected appropriately.
In order to save costs, some informal enterprises will make the surface of the product the same as the standard stipulated by the state, but the pipe will shrink, because we cannot distinguish it by appearance alone, nor can it be measured by general measuring tools.