Teach you how to make the Neoprene Zipper Cable Sleeve last longer?

The Cable Sleeve editor first analyzes that the Neoprene Zipper Cable Sleeve is woven from nylon filaments. Nylon filaments are the general term for thermoplastic resins containing repeated amide groups on the molecular main chain, including aliphatic PA and aliphatic-aromatic PA. And aromatic PA. Among them, aliphatic PA has many varieties, large output and wide application. Its name depends on the specific number of carbon atoms in the synthetic monomer.

① High softness, better elastic memory, bending resilience;
② Better resistance to chemical reaction, anti-fouling, better anti-wear;
③ Can work at high temperature and withstand high temperature disinfection;
④ low water absorption;
⑤ There will be no surface peeling.
The use method of Neoprene Zipper Cable Sleeve is the same as that of ordinary Cable Sleeve, and it can be expanded to 200%. If your product is 3MM in diameter, then you can choose Neoprene Zipper Cable Sleeve with flattened width to match It is suitable for use, saves materials and is beautiful. If you don`t want to cut the parts and loosen the mouth, just use a lighter to melt it.
In general, there are two reasons for the short service life, one is the hardness of the material, and the other is the damage caused by soft friction in different aspects during the high-precision viscous slurry filtration process. For the two cases, the How to maintain it so that it can be used for a longer time, let's take a look at the methods recommended by this site for you:
1. The method of using the hardness is too high, because the hardness is relatively high, the friction will definitely be a little big, which will cause damage, and in the case of friction between the mending net and the braided net tube, it will produce countless small holes. At this time, we The method used is to increase the wire diameter of the Cable Sleeve, and then choose a product with a high hardness material, so that it can be used for a longer period of time.
2. During the screening process, we can increase the edge of the leather pad to reduce the friction of the braided mesh tube. Generally speaking, the stress point is at the center, so use a 5cm rubber pad to separate the center, so that it will To reduce the rigid friction between the Cable Sleeve and the lining mesh, as long as the friction at the center position is reduced, the service life of the Cable Sleeve can be increased by more than 3-5 times.