How to master the vulcanization time and temperature of the Automotive Wiring Harness Protection Sleeve

The vulcanization of the Automotive Wiring Harness Protection Sleeve refers to the conditions of the unvulcanized Braided Sleeve under the conditions of vulcanization time, vulcanization temperature and pressure. The process by which the molecules of the Braided Sleeve undergo chemical cross-linking.

The vulcanization temperature is the prerequisite for the vulcanization reaction of Braided Sleeve. The temperature directly affects the vulcanization speed and quality of the product. The higher the vulcanization temperature, the faster the crosslinking reaction of Braided Sleeve molecules, and the higher the production efficiency. Conversely, the lower the temperature, the slower the reaction rate and the lower the production efficiency. The vulcanization temperature depends on the type of Braided Sleeve and the vulcanization system.
Low-temperature vulcanization is good for the performance of the product, but it will affect the output of the product, because the lower the temperature, the slower the reaction speed and the lower the production efficiency. On the contrary, high temperature will improve production efficiency, but it will affect the quality of products. Excessively high temperature will cause problems such as slightly burnt, brittle, and difficult to remove edges of Braided Sleeve products, which will affect the physical and mechanical properties of Automotive Wiring Harness Protection Sleeve. Therefore, the enterprise will fix the temperature and curing time during production. In addition to paying attention to the output of the product, the enterprise also pays attention to the quality of the product. Therefore, before the new mold is put into production, the most reasonable curing temperature will be tested to improve the efficiency and quality of production.