How to tear the PEEK Braided Sleeve faster?

Peek Braided Sleeve are sticky in the case of one out of ten or one out of twenty, and they will stick together even after cutting, but what the customer needs is one grain (the length is the same). This involves how Tear this problem, if you use manual tearing, the price of PEEK Braided Sleeve will rise in a straight line. When the labor cost is greater than the product cost, you have to find a way. After practice, it is known that a more suitable PEEK Braided Sleeve is torn open method.

Because PEEK Braided Sleeve need to be added to some kitchen utensils, tableware, and gaskets to play an aesthetic role, and most of the manufacturers who produce these products are Cable Sleeve molding factories, Cable Sleeve sheet manufacturers, and our Cable Sleeve. In the field of pipe extrusion, except for the different machines, other production methods are similar. They all require the step of rubber refining. Everyone knows that only in the process of rubber refining can some additives such as vulcanizing agent and color glue be added. Our PEEK Braided Sleeve The tube is also added in the process of exercising the glue. When it is cut into a length of 3mm, there is no need for manual tearing or other operations. It is only necessary to ensure that the length and size are consistent during the cutting process.
In the process of rubber training, there are two huge rollers rolling repeatedly. The PEEK Braided Sleeve is placed in the middle of the two rollers for rolling compaction. Don`t worry that the PEEK Braided Sleeve will be broken during the rolling process. The Cable Sleeve The tube has good compression permanent deformation, and it is no problem to roll it hundreds of times repeatedly. It can also achieve the rubber of the cable casing and integrate the PEEK Braided Sleeve, which has the benefits of killing two birds with one stone.
At this time, under the huge pressure of the two rollers, the interval between the PEEK Braided Sleeve will be torn by force. If it does not tear once, then roll it several times so that the PEEK Braided Sleeve become wrapped in pieces. Inside the cable casing, so there is no need to manually tear the PEEK Braided Sleeve. This kind of PEEK Braided Sleeve can be torn through the roller of the rubber refining machine. The speed is much faster than manual tearing, and this One link is generated without any cost, because practicing glue is also practicing putting the PEEK Braided Sleeve on the roller is also practicing! Tearing the PEEK Braided Sleeve through the roller force of the rubber refining machine is a more realistic way of production efficiency at present, and it can also save customers the labor cost of tearing the PEEK Braided Sleeve! Put the fused Cable Sleeve raw materials in the mold for molding or calendering, and you can see the torn PEEK Braided Sleeve, which does not need to manually tear this product.