What should I do if the Kevlar Braided Sleeve product is easy to absorb dust?

Generally, after the Kevlar Braided Sleeve product is formed in the Cable Sleeve, it is too late to pack and store for a period of time, and the surface of the product will absorb a layer of dust or fiber filaments, which will greatly affect the appearance of the product.

Therefore, the Cable Sleeve has taken corresponding measures to deal with the problem that the Kevlar Braided Sleeve products are easy to absorb dust, such as using anti-static rubber, negative ion separation, etc., but this is very troublesome for consumers , so the corresponding protective measures can only be taken after knowing its adsorption capacity.

First of all, after our Kevlar Braided Sleeve manufacturers produce Kevlar Braided Sleeve products, they will cover a layer of plastic on the surface of the product that has not been removed in time. If the product needs to be stored for a longer time, it needs to be packaged with a film bag. In order to prevent dust from adhering to the surface of Kevlar Braided Sleeve products, it can effectively ensure the appearance quality of the product. For products whose surface is very easy to absorb dust, our Kevlar Braided Sleeve product manufacturers generally recommend customers to spray hand oil. The contact between the outside world and the surface of the product can truly achieve the effect of preventing and preventing the adsorption and dust prevention of Kevlar Braided Sleeve products. Because silicone resin products are mainly based on physical adsorption, even if they are placed there still, they will be adsorbed to the surface of the product with electrostatic reactions. Silicone resin is an anodic raw material and can be used as various chemical auxiliary materials. For other polar substances There will be a relatively strong adsorption reaction. In order to enhance the adsorption capacity of the Kevlar Braided Sleeve, the active structural unit of the adsorbent should be increased.
If the Kevlar Braided Sleeve is calcined until it is completely dehydrated, the silanol of the Kevlar Braided Sleeve will be completely destroyed, reducing or even having no adsorption capacity. If a large amount of water is added to the Kevlar Braided Sleeve, its adsorption capacity will also decrease, because the silicon hydroxyl group forms too many hydrogen bonds with water to reduce the activity ratio.
What if a product like the Kevlar Braided Sleeve protector accidentally gets a lot of dust? We can try to deal with it through the following methods.
1. Slight dust can be wiped with a dust-free cloth, and the dust on the surface of the product can be removed;
2. More serious dirt and dust can be wiped with white electric oil, or directly soaked in white electric oil liquid and then wiped with a clean dust-free cloth.