Precautions and performance effects of Polyester/cotton Braided Sleeve

Precautions when using Polyester/Cotton Braided Sleeve:

1. Clean the surface: clean the surface of the Polyester/cotton Braided Sleeve to be coated, remove surface dust and oil, and keep the surface clean and dry;
2. Metering: Accurately weigh component A and component B (curing agent), and pay attention to stirring the glue before weighing, so that the pigment (or filler) that sinks to the bottom is dispersed into the glue
3. Rubber mixing: The weight ratio of component A: component B = 1:1 should be observed.
4. Stirring: Weigh the two components according to the ratio and put them into the mixing tank for stirring to make them fully mixed evenly.
5. Pouring: Pour the mixed rubber into the device to be potted. Generally, vacuum degassing is not required. If high thermal conductivity is required, vacuum degassing is recommended before pouring. The curing speed can be cured at room temperature or by heating. The curing speed has a great relationship with the curing temperature. It takes a long time to cure in winter. It is cured by heating. It is cured at 80-100 °C for 15-20 minutes, and it generally takes about 8 hours at room temperature. solidify.
Polyester/Cotton Braided Sleeve have heat conduction, insulation, and shockproof properties. The material is soft and the surface is self-adhesive. It is easy to operate. It can be used as a heat conduction filler between the surface of various irregular parts and radiators, shells, etc.