Precautions for stainless steel braided casing

Stainless steel braided sleeves are now used in many places, but due to the rapid popularity of stainless steel braided sleeves, many friends do not know much about stainless steel braided sleeves, especially its precautions, and I will give you the following Popular science about the precautions of stainless steel braided casing.

Customers who have used stainless steel braided sleeves know that stainless steel braided sleeves are easy to loose edges, so you must pay attention to some matters during purchase and use to avoid unnecessary cost losses. Here are a few things to pay attention to matter:

Due to the structure of the Stainless Steel braided sleeve, it is very conducive to the transmission of heat and air humidity, and it is also helpful for the assembly and maintenance of cable identification in the future. High, coordination ability and flame retardant performance.
It has a relatively large guarantee effect on car audio wires. At present, most of the more common stainless steel braided sleeves for electronic harnesses on the market are woven from PET and other materials. On the one hand, they have good gloss, fire resistance and heat permeability. The cable has an obvious buffering effect, so it is also called a flame-retardant Stainless Steel Braided Sleeve. It has good secondary toughness and is also called a telescopic stainless steel Braided Sleeve.
In addition, the braided sleeve has a self-resting type, which can be extended to 3 cups of aperture after being reduced. Therefore, the stainless steel braided sleeve is suitable for the matching size of the cable and can be used for the processing of various commercial KTV wire harness apertures. Stainless steel braided The casing material is light in weight, high in elasticity, easy to turn over, easy to fix on the cable, and used for all shapes.

1. Customers who cut the stainless steel braided casing by themselves are advised to use an oven or a lighter to process the end of the stainless steel braided casing after cutting.
2. If the use length of the stainless steel braided sleeve is mostly the same, it is recommended that the customer ask the stainless steel braided sleeve manufacturer to cut or wrap the sleeve on its behalf.
3. Because the stainless steel braided sleeve is flexible, do not lengthen or shorten the cutting when cutting, so as not to cause the length to be wrong and unusable.
4. Try to choose stainless steel braided casing manufacturers to purchase.