The performance of Kevlar Braided Sleeve on glass edging?

Kevlar Braided Sleeve with glass edge are very common in our life. Kevlar Braided Sleeve are made of high-grade thermoplastic Cable Sleeve or composite materials of butadiene Cable Sleeve and chlorosulfonated polyethylene; Ozone performance, anti-ultraviolet optical rotation performance, good resistance to chemical solvents, wide temperature range; and has strong tear resistance and tear resistance, the temperature range is between -10 and 150 degrees, after millions of bending times will not break afterwards. After compression, it can quickly restore the original appearance and maintain the original softness even in harsh environments; Kevlar Braided Sleeve are environmentally friendly Cable Sleeve and plastic composite Cable Sleeve, which are non-toxic, environmentally friendly, and non-polluting.

But as time goes by, we will find that Kevlar Braided Sleeve are difficult to preserve, especially in summer. One of the most common problems is the melting and deformation of the Kevlar Braided Sleeve if it is exposed to high temperature for a long time. Therefore, when saving or maintaining Kevlar Braided Sleeve, you must pay attention to the following points:
1. In order to avoid direct sunlight for a long time, the sun is too strong, and the aging of the Cable Sleeve is fatal. The Cable Sleeve is generally black and has a strong heat absorption capacity, so it will cause the temperature to rise, so its physical properties will Change, and the immediate result is softening.
Second, in order to avoid high temperature environment, as mentioned earlier, direct sunlight will cause high temperature deformation. Another hazard of high temperatures is that it can cause the cable jacket to melt.
3. The storage environment of Kevlar Braided Sleeve used for glass edging should be kept dry, which is also an important factor to prevent its aging.
In short, the preservation environment of Kevlar Braided Sleeve needs to avoid light, cold and dryness.